Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 CL40 2Rx8 1.1V ECC RDIMM Supermicro H13SVW-NT-OS2 memory upgrade

SKU CH-9GF3-GZWRQ

32 GB DDR5 4800 RDIMM with ECC and registered buffering, validated for the Supermicro H13SVW-NT-OS2 motherboard

  • Capacity32GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • Exact DDR5-4800 CL40 2Rx8 ECC RDIMM matches Supermicro H13SVW-NT-OS2 memory controller
  • Registered architecture offloads controller for full-capacity population across all slots
  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • 10 V operation lowers power draw versus higher-voltage DDR5 modules
  • Major OEM Samsung Micron Hynix chips ensure enterprise-grade reliability

Exact-Match DDR5 Upgrade

This 32 GB DDR5-4800 Registered ECC RDIMM is built to the precise rank, voltage and timing the Supermicro H13SVW-NT-OS2 memory controller expects. It installs as a direct replacement or capacity addition for servers that require 288-pin DDR5 registered modules. The single 32 GB stick lets administrators scale memory in exact increments without mixing ranks.

Registered Form Factor Daily Impact

The 288-pin RDIMM form factor means the module fits only boards wired for registered memory; it will not seat in UDIMM or SODIMM slots. Registered buffering offloads the memory controller so every populated slot runs at the rated 4800 MT/s without signal degradation. ECC corrects single-bit errors on the fly, preventing silent data corruption that could otherwise halt production workloads.

Upgrade Context

This module replaces slower or lower-capacity DDR5 RDIMMs when the platform supports PC5-38400 speeds and 2Rx8 organization. The jump is worth it when the server manual confirms full-speed operation at the target population and the workload benefits from ECC protection at 1.1 V. Buyers who need unbuffered memory or a different pin count cannot use this part.

Puncte forte

  • Exact DDR5-4800 CL40 2Rx8 ECC RDIMM matches Supermicro H13SVW-NT-OS2 memory controller
  • Registered architecture offloads controller for full-capacity population across all slots
  • ECC corrects single-bit errors on the fly preventing silent data corruption
  • 10 V operation lowers power draw versus higher-voltage DDR5 modules
  • Major OEM Samsung Micron Hynix chips ensure enterprise-grade reliability

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K1
Capacity32GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does the DDR5-4800 PC5-38400 interface run at its rated 4800 MT/s on the Supermicro H13SVW-NT-OS2?

Yes, the module is spec-matched to the board so the memory controller recognises it at full capacity and operates at the rated DDR5-4800 speed without down-clocking.

What physical slot and form factor does this 288-pin RDIMM require on the H13SVW-NT-OS2 motherboard?

It fits a standard 288-pin DDR5 RDIMM slot; the board requires registered DIMMs, not UDIMM or SODIMM, and the 2Rx8 rank layout matches the motherboard's population rules.

What is the correct installation sequence for populating these registered ECC modules on the Supermicro H13SVW-NT-OS2?

Consult the motherboard manual for the approved DIMM population order; the common mistake is filling slots sequentially instead of following the board's specific channel-population sequence for registered memory.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.