Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 CL40 2Rx8 ECC UDIMM QNAP TS-H1677AXU-RP

SKU CH-RJBV-1J931

A 32 GB DDR5 ECC UDIMM running at 4800 MT/s with CL40 latency and 1.1 V operation, validated for QNAP TS-H1677AXU-RP NAS systems

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V

Capacity 32GB

  • Error-correcting code protects data integrity
  • 4800 MHz DDR5 speed handles demanding NAS workloads
  • 1 V operation reduces power draw and heat
  • 288-pin UDIMM fits QNAP TS-H1677AXU-RP directly
  • 2Rx8 dual-rank layout maximises 32 GB capacity

32GB DDR5 ECC UDIMM for QNAP NAS

This 32GB DDR5 4800 CL40 ECC unbuffered UDIMM is built for the QNAP TS-H1677AXU-RP NAS. It adds 32GB of error-correcting memory to protect data integrity in storage workloads. The module runs at 1.1V and uses a 288-pin DDR5 form factor.

Who should consider this module

Administrators expanding memory in a compatible QNAP NAS will find this part validated for that system. Builders needing registered RDIMMs, non-ECC modules, or a different speed grade should select another product.

Key specification: DDR5 4800 CL40 ECC unbuffered

The memory operates at DDR5 4800 with CAS latency 40 and ECC enabled in an unbuffered layout. This combination determines whether the NAS will accept the module and maintain data integrity.

Puncte forte

  • Error-correcting code protects data integrity
  • 4800 MHz DDR5 speed handles demanding NAS workloads
  • 1 V operation reduces power draw and heat
  • 288-pin UDIMM fits QNAP TS-H1677AXU-RP directly
  • 2Rx8 dual-rank layout maximises 32 GB capacity

Specificații

BrandNEMIX RAM
SeriesQNAP NAS Compatible Series Memory
ModelQNAP DDR5 4800MHZ ECC Unbuffered UDIMM NAS Memory
Part NumberME38400-328K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemQnap
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 ECC UDIMM
Rank2Rx8
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC Unbuffered UDIMM

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How much power does the 32GB DDR5 4800 CL40 ECC UDIMM draw at its rated 1.1V during continuous operation?

The module operates at 1.1V, the standard voltage for DDR5, so power draw scales with the 4800 MT/s data rate and 2Rx8 organisation rather than exceeding the JEDEC baseline for this density.

Does the QNAP TS-H1677AXU-RP NAS require any specific BIOS setting or firmware version to recognise this 288-pin ECC UDIMM?

The stick is validated for the TS-H1677AXU-RP; installing it in a compatible slot and applying the latest QNAP firmware is sufficient for the system to detect the 32GB capacity and ECC function.

Can I mix this 2Rx8 CL40 module with existing DDR5 4800 memory that has a different rank or latency in the same NAS?

Mixing ranks or CAS latencies at 4800 MT/s is not guaranteed; for stable ECC operation QNAP recommends populating all channels with identical 2Rx8 CL40 modules.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.