Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Twelve green DDR5 RDIMM modules in a row, black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 384GB 12x32GB DDR5 4800 CL40 1.1V 2Rx8 ECC RDIMM memory upgrade

SKU CH-BXTQ-Q6W53

A 384 GB DDR5 kit of twelve 32 GB registered ECC RDIMMs running at 4800 MT/s CL40 1.10 V, validated for the GIGABYTE MZ33-AR1 motherboard

  • Capacity384GB (12 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 12X32GB

Vedeți celelalte 18 configurații
  • 384 GB total capacity from twelve 32 GB modules
  • DDR5-4800 speed with CL40 latency at 1.1 V
  • Registered ECC RDIMM design protects data integrity under full load
  • 2Rx8 dual-rank organisation matches controller expectations exactly
  • 288-pin form factor validated for GIGABYTE MZ33-AR1 motherboard

Kit Composition

This NEMIX RAM kit delivers 384GB of DDR5 capacity across 12 modules of 32GB each. It is built for servers and workstations that require registered ECC memory to maintain data integrity under continuous operation. The 2Rx8 organisation and 1.1V operating voltage match the electrical expectations of compatible Gigabyte platforms.

Sustained Operation

Registered buffering reduces the electrical load on the memory controller, allowing all twelve slots to remain populated at the rated DDR5 4800 speed without down-clocking. ECC circuitry detects and corrects single-bit errors in real time, preventing silent data corruption during long-running workloads. The CL40 latency and 1.10V level are factory-set for stable operation at the specified frequency.

Installation Notes

Each module uses the standard 288-pin RDIMM form factor, which is physically distinct from UDIMM or SODIMM variants and will not seat in the wrong slot type. The motherboard manual for the Gigabyte MZ33-AR1 defines the required population order; deviating from that sequence can prevent the system from recognising the full 384GB. No heat spreaders are fitted, so airflow across the modules must be adequate for the chassis design. Buyers needing a different capacity or a non-registered format should look elsewhere.

Puncte forte

  • 384 GB total capacity from twelve 32 GB modules
  • DDR5-4800 speed with CL40 latency at 1.1 V
  • Registered ECC RDIMM design protects data integrity under full load
  • 2Rx8 dual-rank organisation matches controller expectations exactly
  • 288-pin form factor validated for GIGABYTE MZ33-AR1 motherboard

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K12
Capacity384GB (12 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 12X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How much power does the 384GB 12x32GB DDR5-4800 CL40 1.1V kit draw when all slots are populated continuously?

Each module operates at 1.10V; total system power depends on the motherboard's memory controller and population rules, so consult the GIGABYTE MZ33-AR1 manual for platform-level figures.

What motherboard feature must the GIGABYTE MZ33-AR1 provide for this 288-pin RDIMM kit to function?

The board must support 288-pin DDR5 Registered ECC RDIMMs with 2Rx8 organisation at DDR5-4800 (PC5-38400) and 1.1V operation across all twelve slots.

Will this 2Rx8 Registered ECC kit work alongside any existing DDR5 RDIMMs already installed in the MZ33-AR1?

Mixed-rank or mixed-speed populations are governed by the motherboard's memory-population rules; check the MZ33-AR1 manual for approved DIMM combinations before adding this kit.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.