Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Six green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 384GB (6×64GB) DDR5 5600 CL46 2Rx4 ECC RDIMM 1.1V 288-pin Kit for GIGABYTE MZ33-CP1

SKU CH-9ZWV-HN09E

Six 64 GB DDR5 registered ECC RDIMMs at 5600 MT/s CL46 1.1 V validated for the GIGABYTE MZ33-CP1 server board

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

Vedeți celelalte 24 configurații
  • 384 GB total capacity from six 64 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard's memory slots

Exact-match DDR5-5600 kit for GIGABYTE MZ33-CP1

This 384 GB kit contains six 64 GB DDR5 RDIMMs rated at 5600 MT/s with CL46 timing and 1.1 V operation. Registered ECC design meets the GIGABYTE MZ33-CP1 motherboard's requirements for 288-pin registered memory. The 2Rx4 organisation matches the board's memory-controller expectations for full-capacity recognition.

384 GB capacity with registered ECC headroom

Six dual-rank modules populate every slot while the registered buffer reduces electrical load on the memory controller. ECC corrects single-bit errors in flight, preventing silent data corruption during sustained workloads. The 1.1 V nominal voltage keeps power draw predictable across the fully populated configuration.

DDR5-5600 interface limits

The PC5-44800 transfer rate is the maximum JEDEC speed this kit guarantees; faster data rates would require modules validated beyond this specification. Registered RDIMM topology is mandatory — unbuffered UDIMMs or SODIMMs will not function in the MZ33-CP1's 288-pin slots. Motherboard manual dictates supported population order and maximum capacity per channel.

Puncte forte

  • 384 GB total capacity from six 64 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on supported platforms
  • Registered ECC architecture offloads the memory controller and corrects single-bit errors
  • 1 V operation matches the motherboard's voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the GIGABYTE MZ33-CP1 motherboard's memory slots

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the six 64GB DDR5-5600 RDIMMs run together with any existing DDR5 RDIMMs already installed in my GIGABYTE MZ33-CP1?

The kit is spec-matched to the MZ33-CP1 memory controller at DDR5-5600, 1.1V, CL46, 2Rx4 registered ECC; mixing with other RDIMMs of identical speed, voltage, rank and timing is required for stable operation.

How can I confirm the kit is operating at its rated DDR5-5600 CL46 1.1V settings after installation?

In the BIOS memory information screen, check that all six slots report 64GB, DDR5-5600, CL46, 1.1V and ECC active, then run a full-pass memory diagnostic to verify zero errors.

What exactly ships in the box and is anything else needed to install the 384GB kit?

The box contains the six 64GB DDR5-5600 288-pin ECC registered RDIMMs; no additional hardware is required, but consult the MZ33-CP1 manual for the correct DIMM population order before installing.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.