Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX XT-3915IR memory upgrade

SKU CH-FFRD-JVEMN

4GB DDR3 1333 SODIMM for POSIFLEX XT-3915IR POS terminals, 1.35V low-voltage operation

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 4 GB DDR3 1333 MHz capacity boosts POS terminal responsiveness
  • 35 V low-voltage operation reduces power draw in fanless systems
  • 204-pin SODIMM form factor fits POSIFLEX XT-3915IR slot directly
  • CL9 CAS latency supports stable transaction processing
  • Major OEM Samsung Micron Hynix chips ensure enterprise-grade reliability

POSIFLEX XT-3915IR Compatible Upgrade

This 4 GB DDR3 SODIMM module is built for the POSIFLEX XT-3915IR JIVA IR touch fanless point-of-sale terminal. It delivers 1333 MHz speed with CL9 latency and runs at 1.35 V. The unbuffered non-ECC design matches the original system specification exactly.

Suited for Single-Slot POS Maintenance

Technicians servicing the named terminal can install this 204-pin stick in minutes without tools. Systems that require ECC registered memory or operate on DDR5 platforms cannot use this module. Buyers needing more than 4 GB per slot should look at higher-capacity alternatives.

1.35 V Low-Voltage DDR3 Operation

The 1.35 V rating reduces power draw and heat inside the fanless chassis while maintaining PC3-10600 bandwidth. This voltage level is the deciding factor for stable operation in the target terminal.

Puncte forte

  • 4 GB DDR3 1333 MHz capacity boosts POS terminal responsiveness
  • 35 V low-voltage operation reduces power draw in fanless systems
  • 204-pin SODIMM form factor fits POSIFLEX XT-3915IR slot directly
  • CL9 CAS latency supports stable transaction processing
  • Major OEM Samsung Micron Hynix chips ensure enterprise-grade reliability

Specificații

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

Do I need a POSIFLEX XT-3915IR terminal with a free 204-pin SODIMM slot to install this module?

Yes, this 4 GB DDR3 1333 SODIMM is built for the POSIFLEX XT-3915IR and requires an open 204-pin DDR3 slot in that system.

Will this 1.35 V DDR3 1333 SODIMM run reliably alongside any existing 1.50 V DDR3 modules already in the terminal?

The module operates at 1.35 V with CL9 timing; the platform will run all installed DDR3 at the lowest common voltage and speed, so it will work with 1.50 V sticks at the reduced voltage.

How can I confirm the terminal recognises the full 4 GB at DDR3 1333 after installation?

Check the BIOS memory summary or the operating system's system information — both should show 4 GB running at 1333 MHz (PC3-10600).

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.