BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.002756BTC
În stoc
NEMIX RAM
NEMIX RAM 4GB DDR3 1333MHz 204-Pin SODIMM POSIFLEX EK-2130 memory upgrade
A 4GB DDR3 SODIMM module rated at 1333MHz for POSIFLEX EK-2130 kiosk systems
- Capacity4GB
- SpeedDDR3 1333 (PC3 10600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.50V
- Designed for POSIFLEX EK-2130 Mercury Series kiosks
- 4GB DDR3 1333MHz module boosts POS responsiveness
- 204-pin SODIMM fits POS system memory slots
- Non-ECC unbuffered 2Rx8 design ensures stable operation
- Tested with major OEM chips for reliable performance
Targeted POS Memory Upgrade
This NEMIX RAM module delivers 4GB of DDR3 1333MHz memory built specifically for the POSIFLEX EK-2130 Mercury Series kiosk. It uses a 204-pin SODIMM form factor with CL9 latency and 2Rx8 organisation. The kit is validated for point-of-sale workloads and ships as a single stick. Condition is new.
Drop-In Kiosk Installation
The SODIMM plugs directly into the EK-2130 motherboard slot without adapters or configuration changes. Non-ECC unbuffered operation matches the original specification, so the system recognises the module at boot. Low-profile design clears the compact chassis, and 1.35V operation reduces thermal load inside the sealed enclosure. No extra cables or firmware steps are required.
Capacity For Single-Task Terminals
Four gigabytes handles the OS, POS application and local transaction buffer for typical retail or hospitality deployments. The 1333MHz bus keeps data moving between the CPU and memory without bottlenecking the single-threaded workloads common in kiosk environments. Heavier multitasking, local databases or modern browser-based interfaces will exceed the available headroom.
Puncte forte
- Designed for POSIFLEX EK-2130 Mercury Series kiosks
- 4GB DDR3 1333MHz module boosts POS responsiveness
- 204-pin SODIMM fits POS system memory slots
- Non-ECC unbuffered 2Rx8 design ensures stable operation
- Tested with major OEM chips for reliable performance
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS10600-428K1 |
| Capacity | 4GB |
| Speed | DDR3 1333 (PC3 10600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.50V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL9 |
| Heat Spreader | No |
| Type | 204-Pin DDR3 SODIMM |
| Rank | 2Rx8 |
| Features | DDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM |
Întrebări despre acest articol
Will the 1.50 V operating voltage cause thermal throttling in a POSIFLEX EK-2130 kiosk running continuously?
The module is rated for 1.50 V and uses low-voltage 1.35 V chips, so it runs within normal DDR3 thermal limits without active cooling in the EK-2130 chassis.
How much fan noise or extra heat does this SODIMM add during all-day operation?
The stick has no heat spreader and draws only standard DDR3 power, so it adds negligible heat and zero acoustic noise to the kiosk.
Does the POSIFLEX EK-2130 need a BIOS update or specific chipset to recognise this 4 GB DDR3 1333 MHz module?
The memory is built for the POSIFLEX POS series and matches the EK-2130 Mercury kiosk specifications, so it works without a BIOS change.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
