Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with black chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1600 SODIMM Synology Compatible Series

SKU CH-65P2-8R3EV

4GB DDR3 1600 SODIMM module validated for Synology NAS systems with CL11 timing and 1.35V operation

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.35V
  • Designed for Synology NAS reliability
  • DDR3 1600 speed boosts system responsiveness
  • Low 1.35V operation reduces power draw
  • 204-pin SODIMM fits compatible Synology models
  • Rigorously stress-tested for stable performance

4GB DDR3 SODIMM for Synology NAS

This 4GB DDR3 1600MHz SODIMM module is built for Synology RackStation and DiskStation NAS units that accept PC3-12800 unbuffered memory. It targets administrators upgrading a single slot in compatible appliances.

Capacity headroom for light workloads

The single 4GB rank handles basic file serving, backup tasks and low-intensity virtual machines. It reaches its limit quickly with multiple Docker containers, heavy transcoding or large ZFS deduplication tables that demand more memory bandwidth.

DDR3 1600 interface constraints

The DDR3 1600 SODIMM interface caps transfer rates at PC3-12800, so throughput cannot exceed this generation's ceiling. Systems requiring ECC protection or registered modules must use different memory, as this stick is non-ECC and unbuffered.

Puncte forte

  • Designed for Synology NAS reliability
  • DDR3 1600 speed boosts system responsiveness
  • Low 1.35V operation reduces power draw
  • 204-pin SODIMM fits compatible Synology models
  • Rigorously stress-tested for stable performance

Specificații

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR3 1600MHZ Non-ECC Unbuffered SODIMM NAS Memory
Part NumberMS12800-428K1
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.35V
Compatible SystemSynology
CAS LatencyCL11
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1600MHZ PC3-12800 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

Will this 1.35V DDR3 1600 SODIMM run reliably in a Synology NAS that currently uses 1.5V modules?

Yes, the module operates at 1.35V and is designed for Synology systems; DDR3 SODIMM slots accept both voltages, so it will work alongside existing 1.5V sticks.

How can I verify the CL11 2Rx8 module is recognised at the correct 1600MT/s speed after installation?

Open DSM, go to Control Panel > Info Center > Memory, and confirm the installed capacity shows 4GB running at DDR3 1600 (PC3-12800) with CL11 timings.

Does the single 204-pin SODIMM come with a heat spreader or any extra accessories in the box?

The package contains only the 4GB 204-pin DDR3 SODIMM module; no heat spreader, tools or additional cables are included.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.