Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM 512GB 16x32GB DDR5 4800 CL40 ECC RDIMM THINKMATE SuperServer 111C-NR 121C-TN2R 121C-TN10

SKU CH-GSFF-HGZS8

512 GB of DDR5-4800 ECC registered server memory in a 16-module kit for ThinkMate SuperServer 111C-NR, 121C-TN2R and 121C-TN10

  • Capacity512GB (16 x 32GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 512 GB total capacity in 16 modules of 32 GB each
  • DDR5 4800 speed with PC5-38400 bandwidth for server workloads
  • ECC registered RDIMM design detects and corrects memory errors
  • CL40 CAS latency at 1.1 V operating voltage
  • Validated for Thinkmate SuperServer 111C-NR 121C-TN2R 121C-TN10

Server-grade capacity for Thinkmate platforms

This 512GB kit delivers 16 registered DDR5 modules at 4800MT/s with ECC, built for Thinkmate SuperServer 111C-NR, 121C-TN2R and 121C-TN10 systems. Each 32GB stick runs at 1.1V with CL40 timing and a 1Rx4 organisation. The registered design buffers address and command signals for stable operation in dense configurations.

Low-voltage registered design limits heat

Operating at 1.1V, the modules consume less power per gigabyte than earlier DDR generations while the registered buffer reduces electrical load on the memory controller. No heat spreaders are fitted, so airflow through the server chassis handles thermal management directly. The CL40 latency is typical for 4800MT/s registered ECC memory under normal workloads.

288-pin RDIMM form factor fits validated Thinkmate

The 288-pin DDR5 RDIMM package matches the motherboard sockets in the listed SuperServer models, ensuring correct keying and mechanical fit. ECC and registered functions require platform support that these Thinkmate systems provide. Buyers needing non-ECC unbuffered memory or a different module count cannot use this kit.

Puncte forte

  • 512 GB total capacity in 16 modules of 32 GB each
  • DDR5 4800 speed with PC5-38400 bandwidth for server workloads
  • ECC registered RDIMM design detects and corrects memory errors
  • CL40 CAS latency at 1.1 V operating voltage
  • Validated for Thinkmate SuperServer 111C-NR 121C-TN2R 121C-TN10

Specificații

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K16
Capacity512GB (16 x 32GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content512GB (16X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Întrebări despre acest articol

How do I install the 16 DDR5 RDIMM modules into the SuperServer 111C-NR and which step is often missed?

Power down the server, open the chassis, align each 288-pin module with its slot, press firmly until the ejector tabs click, then verify in BIOS that all 512GB are detected at 4800 MT/s; the step often missed is seating every module fully so both tabs lock.

What maintenance or replacement will the ECC RDIMM kit need over its service life?

The modules have no heat spreaders and no moving parts, so no routine maintenance is required; replacement is only needed if a module fails, which the ECC logic will flag through corrected-error counters in the system logs.

What limit appears first when the 1Rx4 registered DIMMs run sustained workloads at 1.1 V?

The CAS latency of CL40 at DDR5 4800 sets the timing ceiling; under continuous load the memory controller will hit this latency bound before voltage or thermal limits become a factor.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.