Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM 512GB (4x128GB) DDR4 3200 CL22 ECC RDIMM THINKMATE Supermicro 740P-TR 740P-TRT

SKU CH-JX17-8W5VA

A 512 GB DDR4-3200 registered ECC kit of four 128 GB modules built for THINKMATE Supermicro 740P-TR and 740P-TRT servers

  • Capacity512GB (4 x 128GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 512 GB total capacity from four 128 GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered design detects and corrects data errors
  • CL22 CAS latency at 1.2 V operating voltage
  • Validated for ThinkMate Supermicro 740P-TR and 740P-TRT servers

512GB ECC RDIMM kit for Thinkmate Supermicro 740

This registered DDR4 memory kit provides 512GB total capacity across four 128GB modules. It is built for Thinkmate Supermicro SuperServer 740P-TR and 740P-TRT tower systems that require ECC RDIMM modules. The 4Rx4 organisation and CL22 latency suit enterprise workloads needing data integrity and high density. System administrators upgrading compatible Thinkmate platforms can install this kit to maximise supported memory.

Registered DDR4 at 1.2V with no heat spreaders

Operating at 1.20V, the modules run at standard DDR4 voltage for registered server memory. The absence of heat spreaders keeps the form factor slim for dense DIMM populations in tower chassis. Registered buffering reduces electrical load on the memory controller, aiding stability when all 288-pin slots are populated. Typical server airflow across bare modules manages thermals under sustained load.

Four matched modules validated for Thinkmate

The kit ships as a matched set of four 128GB RDIMMs tested for compatibility with the listed Thinkmate Supermicro SuperServer models. Using a pre-validated kit avoids mixed-rank or timing issues that can arise when populating all channels individually. No additional software or firmware is included; installation follows the system owner’s manual. Buyers needing different capacities or non-ECC memory should look elsewhere.

Puncte forte

  • 512 GB total capacity from four 128 GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered design detects and corrects data errors
  • CL22 CAS latency at 1.2 V operating voltage
  • Validated for ThinkMate Supermicro 740P-TR and 740P-TRT servers

Specificații

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-744K4
Capacity512GB (4 x 128GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTHINKMATE
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank4Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content512GB (4X128GB) DDR4 3200MHZ PC4-25600 4Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Întrebări despre acest articol

How do I install the 4Rx4 288-pin DDR4 RDIMM modules in the ThinkMate Supermicro 740P-TR, and what step is often missed?

Power down, open the chassis, align each 128GB module's notch with the slot key, press firmly until both retention clips click, then verify all four are recognised in BIOS before closing the case.

What maintenance or replacement will the 512GB ECC registered kit need over its service life?

The modules have no moving parts or heat spreaders; no scheduled maintenance is required — only replace a stick if ECC logs report uncorrectable errors or the system fails memory diagnostics.

What limit appears first when the 3200 CL22 1.20V kit runs sustained workloads on the 740P-TRT?

The CL22 latency at 3200 MT/s sets the throughput ceiling; sustained loads will hit bandwidth and latency limits of the DDR4-25600 spec before voltage or thermal throttling becomes a factor.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.