Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 576GB 12x48GB DDR5 4800 CL40 1.1V 2Rx8 ECC RDIMM kit for Supermicro H14DST-FL memory upgrade

SKU CH-H00E-V0B6W

576 GB DDR5 ECC registered kit with twelve 48 GB modules at 4800 MHz CL40 1.1 V for Supermicro H14DST-FL

  • Capacity576GB (12 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 12X48GB

Vedeți celelalte 30 configurații
  • 576 GB total capacity from twelve 48 GB modules for maximum server memory density
  • DDR5 4800 speed with CL40 latency delivers rated performance on the Supermicro H14DST-FL
  • Registered ECC architecture with 2Rx8 organisation corrects single-bit errors and stabilises full-slot populations
  • 1 V operating voltage matches the platform's memory-controller specification exactly
  • 288-pin RDIMM form factor ensures correct physical and electrical fit for the target motherboard

576GB DDR5-4800 ECC RDIMM kit for Supermicro

This 12-module kit delivers 576GB of registered ECC DDR5 memory tuned for the Supermicro H14DST-FL motherboard. Each 48GB module runs at 4800 MT/s with CL40 latency at 1.1V. The registered design and on-die ECC suit multi-socket servers that require full population across all channels.

288-pin RDIMM form factor with major-brand DRAM

Modules use Samsung, Micron or Hynix ICs in a 2Rx8 organisation without heat spreaders. The 288-pin RDIMM connector matches the board's DIMM slots exactly, so no adapter or down-clocking is needed. Registered buffering reduces electrical load on the memory controller when all twelve slots are filled.

1.1V operation keeps power draw low at rated speed

Running at the standard 1.1V DDR5 voltage, the kit draws minimal power while maintaining 4800 MT/s throughput. No over-voltage is required to hit the rated frequency, so system fans can remain at baseline speeds. The absence of heat spreaders relies on chassis airflow, which is typical for dense server configurations.

Puncte forte

  • 576 GB total capacity from twelve 48 GB modules for maximum server memory density
  • DDR5 4800 speed with CL40 latency delivers rated performance on the Supermicro H14DST-FL
  • Registered ECC architecture with 2Rx8 organisation corrects single-bit errors and stabilises full-slot populations
  • 1 V operating voltage matches the platform's memory-controller specification exactly
  • 288-pin RDIMM form factor ensures correct physical and electrical fit for the target motherboard

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K12
Capacity576GB (12 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 12X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Does this DDR5-4800 kit run at its rated speed when all twelve slots on the Supermicro H14DST-FL are populated?

Yes, the registered ECC RDIMM design offloads the memory controller so every slot runs fully populated at the rated 4800 MT/s speed and CL40 timing.

What physical slot type does the Supermicro H14DST-FL require for this 12-module kit?

The board uses standard 288-pin DDR5 RDIMM slots; each 48 GB module in the kit matches that form factor exactly.

In what order should the twelve RDIMMs be installed to follow the H14DST-FL population rules?

Consult the motherboard manual for the approved DIMM population sequence; the kit is spec-matched to those rules but the exact slot order varies by board revision.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.