BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277188BTC
În stoc
NEMIX RAM
NEMIX RAM 64GB (2×32GB) DDR5 5600 CL46 1.1V 2Rx8 UDIMM memory upgrade for ASRock IMB-1317
A 64GB dual-channel DDR5 kit with two 32GB modules running at 5600MHz CL46 and 1.1V, built for ASRock IMB-1317 and IMB-X1317 micro-ATX motherboards
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB kit expands system memory for demanding workloads
- DDR5 5600 speed moves data faster than older standards
- CL46 latency keeps response tight under load
- 1 V operation reduces power draw and heat
- Validated for ASRock IMB-1317 and IMB-X1317 motherboards
DDR5 5600 Kit for ASRock IMB-1317
This 64 GB kit contains two 32 GB UDIMM modules built to the DDR5 5600 standard. It targets owners of the ASRock Industrial IMB-1317 or IMB-X1317 micro-ATX motherboard who need the full 64 GB capacity supported by the platform.
64 GB at CL46 1.10 V
The kit runs at 5600 MT/s with a CAS latency of 46 and a nominal voltage of 1.10 V. Two ranks per module (2Rx8) provide density for multi-threaded workloads, while the non-ECC unbuffered design keeps latency low for desktop-class tasks. Headroom ends at the rated JEDEC speed; no XMP or EXPO profiles are included.
288-pin UDIMM, no heat spreader
Modules use the standard 288-pin DDR5 UDIMM form factor and fit directly into the board's DIMM slots. The low-profile design without a heat spreader avoids clearance issues with tall CPU coolers or compact chassis. Buyers who require ECC error correction or registered buffering must select a different product line.
Puncte forte
- 64 GB kit expands system memory for demanding workloads
- DDR5 5600 speed moves data faster than older standards
- CL46 latency keeps response tight under load
- 1 V operation reduces power draw and heat
- Validated for ASRock IMB-1317 and IMB-X1317 motherboards
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock Industrial |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Întrebări despre acest articol
Will the DDR5 5600 kit run stably alongside any existing DDR5 DIMMs I keep in the ASRock IMB-1317?
The board supports DDR5 only, so all installed modules must be DDR5. Matching the 5600 speed and 1.1V voltage gives the best chance of stable mixed operation.
How can I verify the kit is running at 5600 MT/s with CL46 timings after installation?
Open the BIOS or a tool such as CPU-Z and confirm the memory frequency reads 5600 MT/s and the CAS latency shows 46 cycles.
What exactly ships in the MD44800-328K2 box and is anything else required to install it?
The package contains two 32 GB 288-pin DDR5 UDIMMs totalling 64 GB. No extra parts are needed; the modules plug directly into the motherboard slots.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
