NEMIX RAM
NEMIX RAM 64GB (2 x 32GB) DDR5 5600MHz ECC UDIMM 2Rx8 1.1V
A 64 GB dual-channel DDR5 kit with ECC, 5600 MT/s speed and 1.1 V operation for unbuffered server boards
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- CAS Latency46
- Voltage1.1V
- ECCYes
- Buffered/RegisteredUnbuffered
- 64 GB total capacity from two 32 GB modules
- DDR5 5600 MHz speed rated at PC5-44800
- ECC error correction protects data integrity
- Unbuffered 288-pin UDIMM fits compatible workstations
- Low 1.1 V operation reduces power draw
64GB DDR5 ECC UDIMM kit
This NEMIX RAM kit provides 64GB of DDR5 5600MHz memory in two 32GB unbuffered modules. Each stick runs at 1.1V with CAS latency 46 and a 2Rx8 organisation. The 288-pin UDIMMs include on-die ECC for data integrity in server and workstation workloads.
Suited for DDR5 ECC platforms
The modules suit systems that accept unbuffered DDR5 ECC UDIMMs at 5600MHz and 1.1V. Builders needing registered RDIMMs, higher capacities per slot, or lower CAS latency should look at other memory types. The fixed 46 latency and dual-rank layout may not match every memory controller tuning.
5600MHz DDR5 speed rating
The single specification that decides fit is the DDR5 5600MHz (PC5-44800) speed grade. The motherboard and CPU must support this exact data rate for the kit to operate at its rated frequency. If the platform only runs slower DDR5 speeds the modules will downclock.
Puncte forte
- 64 GB total capacity from two 32 GB modules
- DDR5 5600 MHz speed rated at PC5-44800
- ECC error correction protects data integrity
- Unbuffered 288-pin UDIMM fits compatible workstations
- Low 1.1 V operation reduces power draw
Specificații
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: ME44800-328K2-SM-AS-1015A-MT-01-G2 |
| Part Number | Part#: ME44800-328K2-SM-AS-1015A-MT-01-G2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | 46 |
| Voltage | 1.1V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Întrebări despre acest articol
What DDR5 speed does the PC5-44800 rating deliver in practice?
The kit runs at 5600MHz, which is the standard DDR5-5600 data rate for PC5-44800 modules.
How many pins and what voltage do these 288-pin UDIMMs need?
Each 32GB module uses the 288-pin DDR5 UDIMM form factor and operates at 1.1V.
Do I need to enable anything in BIOS for the ECC feature to work?
Yes, ECC must be enabled in the system BIOS; the memory controller will not activate error correction without that setting.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.



