BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00280578BTC
În stoc
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 4800 2Rx8 CL40 ECC RDIMM HP Z8 G5 Fury G5 memory upgrade
64 GB DDR5 kit of two 32 GB registered ECC modules at 4800 MT/s, CL40, 1.1 V, 288-pin for HP Z8 G5 and Fury G5 workstations
- Capacity64GB (2 x 32GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB kit expands workstation capacity for large datasets
- DDR5 4800 speed with CL40 latency supports high-throughput workloads
- ECC registered design detects and corrects memory errors automatically
- 1 V operation reduces power draw under sustained load
- Validated for HP Z8 G5 and Z8 Fury G5 workstations
HP Z8 G5 workstation memory kit
This 64 GB kit contains two 32 GB DDR5 4800 registered ECC modules built for the HP Z8 G5 and Z8 Fury G5 workstations. Each module runs at 1.1 V with CL40 latency and a 2Rx8 organisation. The registered design adds a buffer that helps maintain signal integrity on heavily populated motherboards.
Upgrade from slower or smaller DDR5 ECC RDIMM
If the system currently uses lower-capacity or lower-speed registered ECC DDR5, this kit doubles the capacity per slot and raises the data rate to PC5-38400. The jump is worthwhile when workloads such as large dataset analysis, virtualisation or rendering exceed the existing memory ceiling. Buyers who need non-ECC unbuffered memory or a different form factor should look elsewhere.
Check motherboard slot count and population rules
Verify that the workstation has free 288-pin DDR5 RDIMM slots and consult the HP service manual for the approved population order. The kit ships as a matched pair, so both modules should be installed together to preserve dual-channel operation. Ensure the platform firmware is current before installation.
Puncte forte
- 64 GB kit expands workstation capacity for large datasets
- DDR5 4800 speed with CL40 latency supports high-throughput workloads
- ECC registered design detects and corrects memory errors automatically
- 1 V operation reduces power draw under sustained load
- Validated for HP Z8 G5 and Z8 Fury G5 workstations
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | HPE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 2Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (2X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Întrebări despre acest articol
Will the 288-pin DDR5 RDIMM modules fit the HP Z8 G5 Fury G5 memory slots?
Yes, the 288-pin DDR5 RDIMM form factor matches the workstation's DIMM slots for this platform.
What BIOS setting should be checked after installing the 2Rx8 ECC registered modules?
Ensure the memory mode is set to ECC enabled and the speed is configured for DDR5 4800 operation.
When should the 64GB kit be tested for correct ECC operation?
Run a full memory diagnostic after installation and whenever system instability occurs to verify ECC correction is active.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
