Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Eight green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 768GB (8 x 96GB) DDR5-5600 ECC Registered RDIMM CL46 1.1V 2Rx4 Supermicro H13DSH memory upgrade

SKU CH-Y8Q2-5QT5F

8-module 768GB DDR5-5600 ECC RDIMM kit at 1.1V CL46 validated for Supermicro H13DSH servers

  • Capacity768GB (8 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 768GB 8X96GB

Vedeți celelalte 30 configurații
  • 768 GB total capacity from eight 96 GB modules for maximum server memory density
  • DDR5-5600 speed with CL46 latency and 1.1 V operation matches the platform's rated timing
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors for enterprise stability
  • 288-pin 2Rx4 form factor verified for Supermicro H13DSH motherboard population rules
  • Lifetime replacement warranty with US-based technical support included

Supermicro H13DSH DDR5 upgrade

This 768GB kit contains eight 96GB DDR5-5600 ECC registered RDIMMs built for the Supermicro H13DSH motherboard. Each module runs at 1.1V with CL46 latency and a 2Rx4 organization so the memory controller recognizes the full capacity at rated speed.

Sustained enterprise stability

Registered architecture buffers the address and command signals, letting all eight slots stay fully populated under continuous load without signal degradation. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption that would otherwise trigger unplanned reboots during production workloads.

288-pin DDR5 RDIMM form factor

The kit uses the exact 288-pin registered DIMM layout the H13DSH requires; UDIMM or SODIMM modules will not fit or function. Verify your board's population rules and maximum supported capacity per slot before ordering to ensure compatibility.

Puncte forte

  • 768 GB total capacity from eight 96 GB modules for maximum server memory density
  • DDR5-5600 speed with CL46 latency and 1.1 V operation matches the platform's rated timing
  • Registered ECC RDIMM design offloads the controller and corrects single-bit errors for enterprise stability
  • 288-pin 2Rx4 form factor verified for Supermicro H13DSH motherboard population rules
  • Lifetime replacement warranty with US-based technical support included

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K8
Capacity768GB (8 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 8X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How much power does this 768GB DDR5-5600 kit draw at 1.1V when all eight 96GB modules run continuously?

Each module operates at 1.1V with a CL46 latency; total power depends on your server's memory-controller load and airflow, but the rated voltage stays at 1.1V across all eight 2Rx4 RDIMMs.

What motherboard slot type and population rules must my Supermicro H13DSH already have to accept this 8 x 96GB RDIMM kit?

The board needs eight 288-pin DDR5 RDIMM slots and must support 2Rx4 registered ECC modules at 5600 MT/s; consult the H13DSH manual for the exact population order before installing all eight sticks.

Will these 5600 MT/s CL46 registered ECC modules down-clock reliably if I keep older DDR5-4800 RDIMMs in the same H13DSH chassis?

The kit is validated for 5600 MT/s on the H13DSH; mixing speeds forces the memory controller to run all slots at the lowest common speed, so older 4800 MT/s RDIMMs would pull the whole array down to 4800 MT/s.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.