Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board SODIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR3 1333MHz POSIFLEX JK-3230 Cachet Series Kiosk memory upgrade

SKU CH-GE83-GQ9TA

An 8 GB DDR3 SODIMM running at 1333 MHz for POSIFLEX JK-3230 Cachet Series kiosks

  • Capacity8GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • 8GB capacity expands kiosk multitasking headroom
  • DDR3 1333MHz speed matches POSIFLEX JK-3230 specs
  • 204-pin SODIMM form factor fits factory slot
  • 35V low-voltage operation reduces thermal load
  • CL9 latency supports responsive point-of-sale transactions

POSIFLEX JK-3230 Cachet Series SODIMM upgrade

This 8 GB DDR3 1333 MHz module is built for the POSIFLEX JK-3230 Cachet Series kiosk. It uses a 204-pin SODIMM form factor with 2Rx8 organisation and CL9 latency. The kit suits technicians who maintain point-of-sale terminals needing a direct memory replacement.

Fits the kiosk motherboard slot directly

The non-ECC unbuffered design matches the original system specification without requiring registered memory support. Operating at 1.35 V, it draws less power than standard 1.50 V DDR3 modules. Installation uses the existing SO-DIMM slot and frees no additional expansion resources.

Sustained operation in a fanless enclosure

Modules are stress-tested under load to verify stability during continuous point-of-sale workloads. The low-voltage 1.35 V rating reduces thermal output inside the sealed kiosk chassis. Major-brand Samsung, Micron or Hynix ICs provide consistent throughput over extended shifts.

Puncte forte

  • 8GB capacity expands kiosk multitasking headroom
  • DDR3 1333MHz speed matches POSIFLEX JK-3230 specs
  • 204-pin SODIMM form factor fits factory slot
  • 35V low-voltage operation reduces thermal load
  • CL9 latency supports responsive point-of-sale transactions

Specificații

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-828K1
Capacity8GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

Will the 1.35 V or 1.50 V operating voltage limit stability under sustained POS workloads?

The module is rated at 1.35 V with a maximum of 1.50 V, so the lower voltage is the design target for continuous operation.

Does the SODIMM generate noticeable heat or noise during all-day kiosk use?

It has no heat spreader and runs at standard DDR3 power, producing only modest warmth and no audible noise.

What must the POSIFLEX JK-3230 already have to accept this 204-pin DDR3 upgrade?

A free DDR3 SODIMM slot supporting PC3-10600 non-ECC unbuffered memory at CL9 latency.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.