Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green printed circuit board with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 8GB DDR4 2133 CL15 260-pin SODIMM memory upgrade for POSIFLEX RT-5015

SKU CH-4Y35-9ZENF

8GB DDR4 2133 SODIMM module with CL15 latency and 1.2V operation for POSIFLEX RT-5015 terminals

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 8 GB capacity expands POS terminal multitasking
  • DDR4 2133 MHz speed matches system bus
  • CL15 latency keeps data access responsive
  • 2 V operation reduces power draw
  • 260-pin SODIMM form factor fits POSIFLEX RT-5015

System-specific DDR4 SODIMM for POSIFLEX RT-5015

This 8 GB DDR4 2133 module is built to match the POSIFLEX RT-5015 terminal. It uses a 260-pin SODIMM form factor with CL15 latency and 1.2 V operation. The kit contains a single 2Rx8 stick using major OEM chips. It targets IT teams maintaining or expanding this specific point-of-sale hardware.

Verify terminal model and slot availability

Confirm the unit is a POSIFLEX RT-5015 before ordering. Check that a free SODIMM slot exists and that the board accepts non-ECC unbuffered DDR4 at 2133 MT/s. The module has no heat spreader, so ensure chassis airflow is adequate. Refer to the terminal manual for installation steps and maximum supported capacity per slot.

Replaces slower or smaller DDR4 SODIMMs

Swapping a lower-capacity or lower-speed DDR4 stick for this 8 GB CL15 module adds headroom for multi-tasking POS workloads. The upgrade is worth it when the terminal currently runs with less than 8 GB or uses slower DDR4 speeds. It does not support ECC or registered memory configurations.

Puncte forte

  • 8 GB capacity expands POS terminal multitasking
  • DDR4 2133 MHz speed matches system bus
  • CL15 latency keeps data access responsive
  • 2 V operation reduces power draw
  • 260-pin SODIMM form factor fits POSIFLEX RT-5015

Specificații

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

Întrebări despre acest articol

Does the box contain only the SODIMM or are tools and cables included?

The package contains one 8GB DDR4 2133 CL15 260-pin SODIMM module; no tools, cables or additional components are supplied.

Should I choose the 2Rx8 8GB module or look for a different rank or capacity?

This module is a single 8GB 2Rx8 stick; select it when your POSIFLEX RT-5015 has a free SODIMM slot and the system accepts 2Rx8 density.

What does the 2133 MT/s rating mean once the module is installed in the RT-5015?

The memory will run at up to 2133 MT/s with CL15 latency at 1.2 V, matching the terminal's supported DDR4 speed grade.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.