Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 288-pin DDR4 RDIMM module, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 2400 CL17 1Rx4 ECC RDIMM memory upgrade

SKU CH-13VP-H1VF4

8 GB registered ECC DDR4 module running at 2400 MT/s with CL17 latency for Supermicro servers

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy multi-module workloads
  • 2400 MHz DDR4 speed matches system bus
  • 2 V operation lowers power draw per module
  • 288-pin RDIMM fits Supermicro server slots

8 GB DDR4 ECC RDIMM for Supermicro servers

This 8 GB registered DDR4 module targets IT professionals upgrading Supermicro servers and workstations that require error-correcting memory. It operates at 2400 MHz with CL17 latency and 1.2 V voltage.

DDR4 2400 registered DIMM limits

The module uses the DDR4 2400 standard (PC4-19200) with registered buffering and ECC. Systems must support registered DDR4 RDIMMs; unbuffered or non-ECC slots will not accept this memory. Maximum capacity depends on the motherboard's DIMM count and chipset limits.

Simple DIMM installation with compatibility checks

Installation follows standard 288-pin DDR4 DIMM procedure and takes minutes. Common issues include mixing registered and unbuffered modules, exceeding the platform's rank-per-channel limit, or populating slots in an unsupported order. Verify the server's qualified-vendor list before adding this stick.

Puncte forte

  • ECC protection prevents data corruption in servers
  • Registered design stabilises heavy multi-module workloads
  • 2400 MHz DDR4 speed matches system bus
  • 2 V operation lowers power draw per module
  • 288-pin RDIMM fits Supermicro server slots

Specificații

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2666MHZ ECC RDIMM Registered Server Memory
Part NumberMR19200-814K1
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL17
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2400MHZ PC4-19200 1Rx4 1.2V CL17 288-PIN ECC RDIMM Registered Server Memory

Întrebări despre acest articol

Should I choose the 8GB DDR4-2400 CL17 1Rx4 ECC RDIMM or a different capacity for my Supermicro server?

This module is an 8GB single-rank 1Rx4 registered DIMM; select it when your Supermicro system requires exactly one 8GB stick at 2400 MT/s with ECC and registered buffering.

What does the 2400 MT/s rating deliver once the DIMM is installed in a compatible Supermicro platform?

The module runs at 2400 MT/s with CL17 latency at 1.20 V, providing the rated DDR4-2400 throughput for the memory controller of the qualified Supermicro server or workstation.

How does the 288-pin DDR4 RDIMM interface and registered ECC design affect compatibility and performance limits?

The 288-pin registered DDR4 form factor with on-board ECC and a single 1Rx4 rank fits Supermicro DDR4 RDIMM slots and is validated for the MEM-DR480L-CL01-ER24 part number.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.