BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00276564BTC
În stoc
NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 4800 CL40 SODIMM for ASRock IMB-X1240-WV memory upgrade
A 96GB DDR5 SODIMM kit with two 48GB modules running at 4800MHz CL40 for the ASRock IMB-X1240-WV motherboard
- Capacity96GB (2 x 48GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB kit doubles system capacity with two 48 GB modules
- DDR5 4800 speed transfers data at PC5-38400 bandwidth
- CL40 latency keeps response tight for multitasking workloads
- 1 V operation reduces power draw on the ASRock IMB-X1240-WV
- 262-pin SODIMM form factor fits the Mini-ITX board directly
Capacity and fit
This kit provides 96GB of DDR5 memory in two 48GB SODIMM modules built for the ASRock Industrial IMB-X1240-WV Mini-ITX motherboard. It targets system integrators and IT professionals who need the maximum supported capacity for embedded or industrial workloads.
Upgrade path
The modules replace lower-capacity DDR5 SODIMMs or fill empty slots to reach the platform's 96GB limit. The jump is worthwhile when applications demand more simultaneous data sets than smaller kits can hold.
Installation notes
The 262-pin unbuffered non-ECC design drops into the board's SODIMM sockets without tools or configuration changes. The most common issue is seating both modules fully until the retention clips engage on each side.
Puncte forte
- 96 GB kit doubles system capacity with two 48 GB modules
- DDR5 4800 speed transfers data at PC5-38400 bandwidth
- CL40 latency keeps response tight for multitasking workloads
- 1 V operation reduces power draw on the ASRock IMB-X1240-WV
- 262-pin SODIMM form factor fits the Mini-ITX board directly
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS38400-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 96GB (2 x 48GB) DDR5 4800MHz PC5-38400 2Rx8 1.1V 262-PIN Non-ECC SODIMM KIT |
Întrebări despre acest articol
Will the 262-pin SODIMM modules fit the SO-DIMM slots on the ASRock IMB-X1240-WV motherboard?
Yes, the kit uses 262-pin DDR5 SODIMM modules that match the slot type on the ASRock IMB-X1240-WV Mini-ITX board.
Is any configuration needed in the BIOS after inserting the two 48GB modules, or is it plug-and-play?
The memory is non-ECC unbuffered and runs at 1.1V with CL40 timing; it typically operates at DDR5 4800 speeds without manual BIOS changes.
Do these modules have a heat spreader that could require extra clearance, and will the chips need replacement over time?
The modules have no heat spreader, so they fit in tight spaces, and the Samsung, Micron or Hynix chips are rated for the life of the system with no scheduled replacement.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
