BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00278106BTC
În stoc
NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 SODIMM for ASRock IMB-X1240-WV memory upgrade
A 96 GB dual-channel DDR5 kit with two 48 GB modules running at 5600 MT/s CL46, built for the ASRock IMB-X1240-WV
- Capacity96GB (2 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96 GB total capacity for demanding workloads using two 48 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth for fast data throughput
- CL46 latency at 1.1 V for stable low-voltage operation
- 262-pin SODIMM form factor fits the ASRock IMB-X1240-WV Mini-ITX board
- Non-ECC unbuffered 2Rx8 design using major OEM Samsung Micron Hynix chips
Designed for ASRock IMB-X1240-WV
This 96GB kit delivers two 48GB DDR5 SODIMM modules built for the ASRock Industrial IMB-X1240-WV Mini-ITX motherboard. It targets embedded developers and system integrators who need maximum memory capacity in a compact industrial platform. Non-ECC unbuffered operation matches the board's consumer-class memory controller.
Straightforward SODIMM installation
The 262-pin modules seat vertically in the board's two SO-DIMM slots with a single notch key. No heat spreader means clearance is minimal, but the low-profile design fits tight chassis. The usual risk is mixing ranks or speeds; this matched 2Rx8 pair avoids that. Verify the board firmware recognises the full 96GB at 5600 MT/s after seating.
Confirm board revision and slot count
Check that your IMB-X1240-WV revision physically provides two SO-DIMM sockets and that the BIOS version listed by ASRock supports 48GB single-rank density per slot. The kit requires 1.1V DDR5 signalling; older revisions locked to lower voltages will not post. No other memory type or voltage is compatible with this board.
Puncte forte
- 96 GB total capacity for demanding workloads using two 48 GB modules
- DDR5 5600 speed with PC5-44800 bandwidth for fast data throughput
- CL46 latency at 1.1 V for stable low-voltage operation
- 262-pin SODIMM form factor fits the ASRock IMB-X1240-WV Mini-ITX board
- Non-ECC unbuffered 2Rx8 design using major OEM Samsung Micron Hynix chips
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 96GB (2 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 262-PIN Non-ECC SODIMM KIT |
Întrebări despre acest articol
How do I confirm the kit is running at 5600 speed and CL46 after installation?
Open Task Manager or CPU-Z and check the memory tab; it should show 5600 MT/s and a CAS latency of 46.
What comes in the package and is anything else required?
The box contains two 48 GB 262-pin DDR5 SODIMM modules for a total of 96 GB; no extra parts or cables are needed.
Which capacity version of this kit should I choose for the IMB-X1240-WV?
This specific kit is the 96 GB (2 x 48 GB) version; choose it if your board supports 48 GB per slot and you need the maximum capacity.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
