BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00281088BTC
În stoc
NEMIX RAM
NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 SODIMM memory upgrade for ASRock IMB-X1244-WV
A 96 GB dual-channel DDR5 SODIMM kit with CL46 timing and 1.1 V operation, built for the ASRock IMB-X1244-WV mini-ITX board
- Capacity96GB (2 x 48GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 96GB total capacity from two 48GB modules for demanding workloads
- DDR5 5600 speed (PC5-44800) enables high data throughput
- CL46 latency at 1.1V balances performance and efficiency
- 262-pin SODIMM form factor fits the ASRock IMB-X1244-WV Mini-ITX board
- Non-ECC unbuffered 2Rx8 design using major OEM chips for broad compatibility
Targeted DDR5 SODIMM upgrade
This NEMIX RAM kit delivers 96GB of DDR5 memory across two 48GB modules, designed specifically for the ASRock Industrial IMB-X1244-WV Mini-ITX motherboard. It operates at 5600MHz with CL46 latency and a low 1.1V voltage. The unbuffered, non-ECC SODIMMs use major OEM chips for reliable system stability.
Suited for compatible industrial boards
Builders upgrading the named ASRock motherboard to its maximum supported capacity will find this dual-rank kit a direct fit. Systems requiring ECC error correction or registered DIMMs cannot use these modules. Buyers with different laptop or motherboard models should verify their exact specifications before purchasing.
Critical spec is the 262-pin DDR5 SODIMM form factor
Only platforms accepting DDR5 SODIMMs at 5600MHz with 1.1V operation and 2Rx8 organisation can install this memory. The physical notch position and electrical signalling differ from earlier DDR generations, preventing insertion into incompatible slots. Confirm your board requires this exact module type before ordering.
Puncte forte
- 96GB total capacity from two 48GB modules for demanding workloads
- DDR5 5600 speed (PC5-44800) enables high data throughput
- CL46 latency at 1.1V balances performance and efficiency
- 262-pin SODIMM form factor fits the ASRock IMB-X1244-WV Mini-ITX board
- Non-ECC unbuffered 2Rx8 design using major OEM chips for broad compatibility
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered SODIMM Memory |
| Part Number | MS44800-4828K2 |
| Capacity | 96GB (2 x 48GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | ASRock |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 262-Pin DDR5 SODIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 96GB (2 x 48GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 262-PIN Non-ECC SODIMM KIT |
Întrebări despre acest articol
Will the 262-pin DDR5 SODIMM modules fit the ASRock IMB-X1244-WV Mini-ITX motherboard slots?
Yes, the kit uses 262-pin DDR5 SODIMM modules which match the slot type on the ASRock IMB-X1244-WV motherboard.
What is the correct orientation step when installing the 2Rx8 modules into the SODIMM slots?
Align the notch on the module with the key in the slot, insert at an angle, then press down firmly until the side clips click into place.
Does the 1.10V DDR5 memory require any heatsink cleaning or thermal pad replacement over time?
No, the modules have no heat spreader and run at standard 1.10V, so no thermal maintenance is needed.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
