BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00280234BTC
În stoc
NEMIX RAM
NEMIX RAM 96GB (6 x 16GB) DDR4 2933MHz PC4-23400 2Rx8 1.2V 288-PIN ECC RDIMM server RAM
A 96GB DDR4 server memory kit of six 16GB registered ECC RDIMMs running at 2933MHz with CL21 latency and 1.2V operation
- Capacity96GB (6 x 16GB)
- SpeedDDR4 2933 (PC4 23400)
- CAS Latency21
- Voltage1.2V
- ECCYes
- Buffered/RegisteredRegistered
- 96 GB total capacity from six 16 GB modules
- ECC registered design detects and corrects data errors
- DDR4 2933 MHz speed rated at PC4-23400
- Low 1.2 V operation reduces server power draw
- Built with major OEM Samsung, Micron or Hynix chips
Server capacity and configuration
This 96 GB kit delivers six 16 GB DDR4 modules running at 2933 MHz with CAS 21 latency. It targets servers that require registered ECC memory in a 288-pin RDIMM form factor.
Registered ECC headroom
The 2Rx8 organisation and 1.2 V operation provide stability for multi-threaded workloads and virtualisation. Capacity runs out when applications demand more than the six populated slots can supply.
OEM chipset and registered design
Major OEM Samsung, Micron or Hynix components underpin the registered buffer that reduces electrical load on the memory controller. The 288-pin RDIMM layout fits server boards wired for DDR4 2933 registered DIMMs.
Puncte forte
- 96 GB total capacity from six 16 GB modules
- ECC registered design detects and corrects data errors
- DDR4 2933 MHz speed rated at PC4-23400
- Low 1.2 V operation reduces server power draw
- Built with major OEM Samsung, Micron or Hynix chips
Specificații
| Brand | NEMIX RAM |
|---|---|
| Model | Part#: MR23400-628K6-SM-SYS-5019P-M |
| Part Number | Part#: MR23400-628K6-SM-SYS-5019P-M |
| Capacity | 96GB (6 x 16GB) |
| Speed | DDR4 2933 (PC4 23400) |
| CAS Latency | 21 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
Întrebări despre acest articol
Will the six 16GB 2933MHz DDR4 ECC RDIMMs run alongside existing DDR4 modules at the server's lowest common speed?
All six registered ECC modules operate at 1.2V and DDR4 2933MHz PC4-23400; the memory controller will negotiate the highest shared speed with any other DDR4 DIMMs installed.
How can I confirm the 2Rx8 registered ECC kit is recognised and error-correcting after installation?
Enter the BIOS or UEFI and verify that all 96GB appear at 2933MHz with ECC status shown as active or enabled.
Does the MR23400-628K6-SM-SYS-5019P-M kit include only the six 288-pin RDIMMs or any extra parts?
The package contains the six 16GB DDR4 2933MHz ECC RDIMMs and nothing else; no cables, brackets or software are supplied.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
