Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green rectangular DDR5 RDIMM module with black chips, no heat spreader, 288 gold pins along bottom edge

NEMIX RAM

NEMIX RAM 96GB DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM Supermicro X14SDW-42C-SP9F memory upgrade

SKU CH-5SN0-K08KH

96GB DDR5-6400 ECC Registered RDIMM, CL52 2Rx4 at 1.1V, validated for Supermicro X14SDW-42C-SP9F

  • Capacity96GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 96GB

  • 96 GB capacity lets the Supermicro X14SDW-42C-SP9F handle large workloads
  • DDR5 6400 speed with CL52 latency delivers rated performance
  • Registered ECC design corrects single-bit errors for data integrity
  • 1 V operation matches the board's memory-controller specification
  • 2Rx4 288-pin RDIMM form factor fits the required slot configuration

Exact 96GB DDR5 upgrade

This 96GB DDR5 6400 CL52 2Rx4 registered ECC RDIMM is built for the Supermicro X14SDW-42C-SP9F motherboard. It delivers the precise voltage, rank and timing the platform expects so every slot can run fully populated at rated speed. Ideal for administrators who need maximum capacity in a validated configuration.

Registered RDIMM with ECC

The 288-pin registered design buffers address and command signals, letting the memory controller drive a full complement of modules without signal degradation. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. No heat spreader is fitted, so airflow in dense server chassis remains unobstructed.

Verify population rules first

Server memory support varies by model and BIOS revision, so consult the system or motherboard manual for approved capacities and DIMM installation order before ordering. This kit will not fit boards that require UDIMM or SODIMM form factors, nor will it work on platforms limited to lower DDR5 speeds or different voltage rails. Buyers needing non-ECC or unbuffered modules should look elsewhere.

Puncte forte

  • 96 GB capacity lets the Supermicro X14SDW-42C-SP9F handle large workloads
  • DDR5 6400 speed with CL52 latency delivers rated performance
  • Registered ECC design corrects single-bit errors for data integrity
  • 1 V operation matches the board's memory-controller specification
  • 2Rx4 288-pin RDIMM form factor fits the required slot configuration

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K1
Capacity96GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What DDR5 speed and PC5 rating does this 96GB RDIMM run at?

The module operates at DDR5 6400, which corresponds to PC5-51200, so the memory controller sees the full 6400 MT/s data rate when populated correctly.

What physical slot and pin count does this registered DIMM require?

It uses the standard 288-pin DDR5 RDIMM form factor that fits only a registered DIMM slot on the Supermicro X14SDW-42C-SP9F motherboard.

In which order should I populate the slots on this Supermicro board?

Follow the motherboard manual's approved DIMM population sequence for the X14SDW-42C-SP9F; installing modules in the wrong order can prevent the system from recognising the full 96GB capacity.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.