NEMIX RAM
NEMIX RAM DDR5 1.1TB 12x96GB 6400MHz CL52 ECC RDIMM Supermicro H13DSH memory upgrade
A 1.1 TB DDR5 kit of twelve 96 GB registered ECC RDIMMs at 6400 MHz CL52, validated for Supermicro H13DSH servers
- Capacity1.1TB (12 x 96GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 1TB total capacity from twelve 96GB modules for maximum server density
- DDR5-6400 speed with CL52 latency runs at rated performance on the H13DSH
- Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
- 2Rx4 dual-rank organisation and 1.10V voltage match the board's memory-controller requirements
- 288-pin DDR5 RDIMM form factor fits the Supermicro H13DSH memory slots exactly
Exact-match upgrade for Supermicro H13DSH
This kit delivers 1.1TB of DDR5 capacity across twelve 96GB modules, each running at 6400MHz with CL52 timing. The 2Rx4 registered ECC design matches the memory controller requirements of the Supermicro H13DSH motherboard so the full capacity is recognised at rated speed.
Sustained-load behaviour with registered ECC
Registered buffering offloads the memory controller, allowing all twelve slots to remain fully populated at 6400MHz without downclocking. ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during continuous server workloads.
Thermals, noise and power in normal use
Modules operate at 1.10V without heat spreaders, relying on chassis airflow for cooling. The low voltage and bare-DIMM design keep power draw modest and eliminate fan noise from the memory itself, leaving thermal performance dependent on the server's cooling solution.
Puncte forte
- 1TB total capacity from twelve 96GB modules for maximum server density
- DDR5-6400 speed with CL52 latency runs at rated performance on the H13DSH
- Registered ECC RDIMM architecture offloads the memory controller and corrects single-bit errors
- 2Rx4 dual-rank organisation and 1.10V voltage match the board's memory-controller requirements
- 288-pin DDR5 RDIMM form factor fits the Supermicro H13DSH memory slots exactly
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-9624K12 |
| Capacity | 1.1TB (12 x 96GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 1.1TB 12X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT |
Întrebări despre acest articol
How much heat and power does the 1.10V DDR5 6400 kit add when all 12 slots run continuously?
Each 96GB module runs at 1.10V with registered buffering that reduces electrical load on the memory controller, so the fully populated 1.1TB configuration draws minimal extra power and stays cool without a heat spreader.
What motherboard slot type and population rules must my Supermicro H13DSH already have for this 12×96GB RDIMM kit?
The board needs 288-pin DDR5 RDIMM slots and must support 2Rx4 registered modules in a 12-DIMM layout; consult the H13DSH manual for the exact population order before installing.
Will these CL52 2Rx4 modules run at 6400MHz alongside any older DDR5 RDIMMs I keep in the same server?
Mixing ranks, latencies or voltages can force the memory controller to downclock all channels; for stable 6400MHz operation the H13DSH should be populated only with this matched 12-module kit.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)



