Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 4800 CL40 512GB 16x32GB ECC RDIMM 2Rx8 1.1V Supermicro H13SSH-E memory upgrade

SKU CH-6TBA-RTAV2

512GB DDR5 4800 ECC registered RDIMM kit in sixteen 32GB modules, CL40 at 1.1V, validated for the Supermicro H13SSH-E motherboard

  • Capacity512GB (16 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 512GB 16X32GB

Vedeți celelalte 30 configurații
  • 512 GB total capacity from 16 matched 32 GB modules
  • DDR5 4800 speed with CL40 latency runs at rated performance
  • Registered ECC design corrects single-bit errors and stabilises full-slot loads
  • 1 V operation matches the board's memory-controller specification
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E motherboard

512GB DDR5-4800 ECC RDIMM kit

This 512GB kit contains 16 modules of 32GB each, built to the DDR5-4800 (PC5-38400) standard with CL40 latency and 1.1V operation. Registered ECC RDIMM architecture delivers the error correction and signal buffering that multi-socket server platforms require. It is intended for administrators upgrading a Supermicro H13SSH-E motherboard to its maximum supported capacity.

Installation follows standard RDIMM procedure

Align the 288-pin modules with the motherboard slots and press firmly until the retention clips engage. Because the board must be fully populated with 16 DIMMs, the population order specified in the system manual must be followed exactly; an incorrect sequence will prevent the server from posting. No heat spreaders are present, so airflow across the modules is unimpeded.

Verify your configuration before ordering

Confirm that your Supermicro H13SSH-E motherboard supports 512GB total capacity and the approved DIMM population order for 16 modules. The manual will list the required slot sequence and any BIOS version needed for full recognition. This kit is DDR5 RDIMM only; it will not fit UDIMM or SODIMM slots and cannot be mixed with other memory types.

Puncte forte

  • 512 GB total capacity from 16 matched 32 GB modules
  • DDR5 4800 speed with CL40 latency runs at rated performance
  • Registered ECC design corrects single-bit errors and stabilises full-slot loads
  • 1 V operation matches the board's memory-controller specification
  • 288-pin RDIMM form factor fits the Supermicro H13SSH-E motherboard

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-328K16
Capacity512GB (16 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 16X32GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I confirm the kit is running at DDR5 4800 with CL40 after installation?

Check the BIOS memory information screen; it should report DDR5 4800 (PC5-38400) at 1.10V with CAS latency 40 and show all 512GB detected.

What comes in the box and do I need any extra parts?

The package contains the 512GB kit of 16 x 32GB DDR5 288-pin ECC Registered RDIMMs; no additional components are required for the Supermicro H13SSH-E.

Which capacity version should I choose for a fully populated Supermicro H13SSH-E?

This 512GB (16 x 32GB) kit fills every DIMM slot with the 2Rx8 registered ECC modules the board expects for maximum supported capacity.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.