Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Eight green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 128GB (8×16GB) CL46 1.1V ECC Registered RDIMM Supermicro H13DSH memory upgrade

SKU CH-52VG-DJVG2

128 GB DDR5 server kit with eight 16 GB registered ECC RDIMMs at 5600 MHz CL46 1.1 V for Supermicro H13DSH

  • Capacity128GB (8 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 8X16GB

Vedeți celelalte 30 configurații
  • 128 GB capacity with eight 16 GB modules for dense server workloads
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • ECC registered RDIMM corrects single-bit errors and buffers signals
  • 1 V operation at CL46 latency meets JEDEC standard
  • Verified fitment for Supermicro H13DSH motherboard memory slots

Exact-match DDR5 server upgrade

This 128GB kit delivers eight 16GB DDR5 5600 Registered ECC RDIMMs built to the precise rank, voltage and timing the Supermicro H13DSH memory controller expects. Each module runs at 1.1V with CL46 latency and a 1Rx8 organisation so the board recognises the full capacity at rated speed. The 288-pin RDIMM form factor matches the slots this motherboard requires, not UDIMM or SODIMM alternatives. Spec-matched population rules mean every slot can be filled without guesswork.

Enterprise stability under load

Registered architecture buffers the command bus so the memory controller stays stable when all eight slots are populated at full capacity. ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots before they reach production workloads. Operating at the standard 1.1V DDR5 voltage keeps power draw predictable in dense server configurations. No heat spreaders are fitted, allowing unrestricted airflow across the DRAM in chassis with directed cooling.

Build integration checklist

Verify your H13DSH manual for supported capacities, approved DIMM population order and installation steps before fitting the kit. The modules require 288-pin RDIMM slots and a platform that enables Registered ECC operation at DDR5 5600. Systems limited to UDIMM, SODIMM or non-ECC memory cannot use this kit. Buyers needing higher per-module density or non-registered memory should select a different specification.

Puncte forte

  • 128 GB capacity with eight 16 GB modules for dense server workloads
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • ECC registered RDIMM corrects single-bit errors and buffers signals
  • 1 V operation at CL46 latency meets JEDEC standard
  • Verified fitment for Supermicro H13DSH motherboard memory slots

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K8
Capacity128GB (8 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 8X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I install the 288-pin DDR5 RDIMMs in the Supermicro H13DSH, and which slot order is the common mistake?

Populate the eight 288-pin DDR5 RDIMM slots following the H13DSH manual's exact population sequence; the frequent error is filling slots sequentially instead of the board's prescribed interleaved order, which prevents the 128GB kit from training at 5600 MT/s.

What maintenance or replacement will the 1Rx8 registered ECC modules need over their service life?

The 1.10V registered ECC RDIMMs have no user-serviceable parts; ECC corrects single-bit errors automatically, so replacement only occurs if a module fails completely, which is covered by the lifetime replacement warranty.

What limit appears first when the 128GB kit runs sustained workloads at 5600 MT/s CL46?

The primary sustained-use limit is the DDR5 5600 MT/s data rate combined with CL46 latency at 1.10V; the registered buffer and ECC maintain stability, so throughput caps at the rated PC5-44800 bandwidth before thermal or voltage constraints arise.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.