Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR5 UDIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 32GB 2x16GB CL46 1.1V UDIMM Supermicro X13SAW-TLN4F memory upgrade

SKU CH-SAX8-CQST4

32 GB dual-channel DDR5 kit with two 16 GB modules at 5600 MHz, CL46, 1.1 V, verified for the Supermicro X13SAW-TLN4F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • Exact DDR5-5600 match for Supermicro X13SAW-TLN4F board
  • 32 GB dual-channel kit (2 × 16 GB) 1Rx8 CL46 1.10 V
  • Major OEM chips from Samsung, Micron, Hynix tested at rated speed
  • 288-pin unbuffered UDIMM form factor fits desktop motherboard slots
  • Lifetime replacement warranty with US-based technical support

Exact-match DDR5-5600 kit for Supermicro

This 32 GB kit contains two 16 GB DDR5 UDIMMs rated at 5600 MT/s with CL46 latency and 1.1 V operation. The modules are non-ECC, unbuffered, single-rank 1Rx8 parts built with major OEM chips. They are specified for the Supermicro X13SAW-TLN4F motherboard.

Verify motherboard manual for population rules

Before ordering, consult the system or motherboard manual to confirm supported capacities, approved DIMM population order, and installation steps. Ensure the board accepts 288-pin DDR5 UDIMMs at 1.1 V and that the two-module configuration matches the required slot layout.

Suits builders upgrading the named Supermicro

This kit suits users who need a validated 32 GB DDR5-5600 upgrade for the specific Supermicro motherboard listed. It is not for systems that require ECC or registered modules, boards limited to lower DDR5 speeds, or builds needing more than 32 GB of memory.

Puncte forte

  • Exact DDR5-5600 match for Supermicro X13SAW-TLN4F board
  • 32 GB dual-channel kit (2 × 16 GB) 1Rx8 CL46 1.10 V
  • Major OEM chips from Samsung, Micron, Hynix tested at rated speed
  • 288-pin unbuffered UDIMM form factor fits desktop motherboard slots
  • Lifetime replacement warranty with US-based technical support

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What comes in the 32 GB kit and is anything else required?

The kit contains two 16 GB DDR5 UDIMM modules; no extra parts or cables are needed for installation.

Should I choose this 32 GB kit or a different capacity for the Supermicro X13SAW-TLN4F?

This 32 GB (2 x 16 GB) kit matches the board's DDR5 5600 specification; other capacities would need separate compatibility verification.

What does the DDR5 5600 rating mean once the modules are installed in the Supermicro board?

The memory will run at 5600 MT/s with CL46 latency at 1.1 V, delivering the rated PC5-44800 bandwidth.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.