Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Twelve green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600 576GB (12x48GB) ECC RDIMM CL46 1.1V 2Rx8 memory upgrade for GIGABYTE MA34-CP0

SKU CH-T5VP-Q3WSC

576 GB DDR5-5600 ECC registered kit in twelve 48 GB modules at CL46 and 1.1 V, validated for the GIGABYTE MA34-CP0 motherboard

  • Capacity576GB (12 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 12X48GB

Vedeți celelalte 24 configurații
  • 576GB total capacity from twelve 48GB modules for memory-intensive server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on the GIGABYTE MA34-CP0
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1V operating voltage matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the board's required DIMM slots without adapters

NEMIX RAM DDR5 5600 576GB Kit

This 576GB kit consists of twelve 48GB DDR5 5600 Registered ECC RDIMMs built for the GIGABYTE MA34-CP0 motherboard. It targets servers and workstations that require maximum registered memory capacity with error correction. The modules operate at 1.1V with CL46 timing and a 2Rx8 organisation. Buyers needing unbuffered UDIMMs or non-ECC memory should look elsewhere.

Capacity and Headroom

Twelve 48GB ranks deliver 576GB total, allowing heavily virtualised hosts or in-memory databases to run large working sets without swapping. Registered buffering lets every slot stay populated at full speed, while ECC corrects single-bit errors before they affect production workloads. The kit stops at 576GB; systems requiring more memory per socket or higher frequencies will exceed this module's rated limits.

DDR5 5600 PC5-44800 Interface

The DDR5 5600 (PC5-44800) interface provides the bandwidth ceiling for this kit, and the registered RDIMM protocol is mandatory for the target motherboard. Mixing with unbuffered DIMMs or different speeds will prevent the system from posting at the rated frequency. The 288-pin form factor fits only DDR5 RDIMM slots; it cannot be used in UDIMM or SODIMM platforms.

Puncte forte

  • 576GB total capacity from twelve 48GB modules for memory-intensive server workloads
  • DDR5 5600 speed with CL46 latency delivers rated throughput on the GIGABYTE MA34-CP0
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • 1V operating voltage matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the board's required DIMM slots without adapters

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K12
Capacity576GB (12 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 2Rx8 registered ECC DDR5-5600 modules work if I keep some older RDIMMs in the other slots?

Mixing ranks or speeds is not recommended. The board's population rules expect identical 2Rx8 registered ECC modules at 5600 MT/s and 1.1 V; adding different DIMMs can prevent full-capacity recognition or force a lower common speed.

How can I verify the 12-module kit is running at the rated 5600 MT/s CL46 after installation?

Enter the BIOS and confirm the memory frequency shows 5600 MT/s with CL46 timings, then run a full memory diagnostic to ensure all 576 GB are detected without errors.

Does the kit include anything besides the twelve 48 GB 288-pin RDIMMs, and do I need extra parts?

The package contains only the twelve 48 GB DDR5-5600 ECC registered RDIMMs. No heat spreaders, cables, or tools are included, and none are required for installation.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.