Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM DDR5 5600 96GB (6×16GB) ECC RDIMM CL46 1.1V Supermicro H14DSG-O-CPU

SKU CH-BTX7-KMVK0

Six 16 GB DDR5 modules deliver 96 GB of registered ECC server memory at 5600 MT/s with CL46 latency and 1.1 V operation for the Supermicro H14DSG-O-CPU motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB capacity across six 16 GB modules for dense server workloads
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • Registered ECC design with CL46 latency corrects errors and stabilises fully populated channels
  • 1 V operation at 288-pin RDIMM form factor matches Supermicro H14DSG-O-CPU requirements
  • Lifetime replacement warranty with US-based technical support included

Exact-match server upgrade

This 96GB kit delivers six 16GB DDR5 RDIMMs rated at 5600 MT/s with CL46 timings and 1.10V operation. The modules are built to the precise rank, voltage and timing the Supermicro H14DSG-O-CPU memory controller expects so the full capacity is recognised and runs at rated speed without manual tuning.

Thermals noise and power

Registered architecture buffers the address and command signals reducing electrical load on the controller when all slots are populated. ECC corrects single-bit errors on the fly preventing silent data corruption and unplanned reboots in production workloads. The 1.10V operating voltage keeps power draw low for dense server configurations.

Build quality and daily use

Major OEM Samsung Micron or Hynix chips are assembled without heat spreaders for standard 288-pin RDIMM height clearance in 1U and 2U chassis. The six-module kit follows the board's population rules so every slot can be filled in the approved order. Lifetime replacement warranty and US-based technical support back the installation.

Puncte forte

  • 96 GB capacity across six 16 GB modules for dense server workloads
  • DDR5 5600 speed rated at PC5-44800 for high throughput
  • Registered ECC design with CL46 latency corrects errors and stabilises fully populated channels
  • 1 V operation at 288-pin RDIMM form factor matches Supermicro H14DSG-O-CPU requirements
  • Lifetime replacement warranty with US-based technical support included

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I install the 6×16 GB DDR5 5600 RDIMM kit in the Supermicro H14DSG-O-CPU, and which population step is most often missed?

Populate all six slots following the motherboard manual’s exact DIMM order; the step most often missed is verifying the approved population sequence for full 96 GB capacity before powering on.

What maintenance or replacement will the 1.10 V CL46 ECC RDIMM kit need later?

No scheduled maintenance is required; if a module fails, replace it with another DDR5 5600 1Rx8 Registered ECC RDIMM of the same voltage and timing to keep the kit matched.

What limit appears first on the 96 GB DDR5 5600 Registered ECC kit under sustained load?

The memory controller’s maximum supported capacity and population rules for the Supermicro H14DSG-O-CPU are the first constraints; the kit runs at its rated 5600 MT/s CL46 within those limits.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.