Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Six green DDR5 RDIMM sticks without heat spreaders in a static bag

NEMIX RAM

NEMIX RAM DDR5 5600 96GB 6x16GB CL46 1Rx8 1.1V ECC RDIMM Supermicro H14DSH memory upgrade

SKU CH-NFQX-CTHHB

A 96 GB kit of six 16 GB DDR5-5600 registered ECC RDIMMs at 1.1 V CL46, built for the Supermicro H14DSH motherboard

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Vedeți celelalte 30 configurații
  • 96 GB total capacity lets you run large workloads with a 6 x 16 GB kit
  • DDR5-5600 speed rated at PC5-44800 delivers the bandwidth your server expects
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • CL46 latency at 1.1 V matches the motherboard's timing and voltage requirements
  • 288-pin RDIMM form factor fits the Supermicro H14DSH memory slots exactly

Exact-match DDR5 kit for Supermicro H14DSH

This 96GB kit contains six 16GB DDR5 5600 RDIMM modules built to the precise rank, voltage and timing the server's memory controller expects. Each module is a 1Rx8 registered ECC DIMM running at 1.1V with CL46 latency, so the board recognises the full capacity and runs at its rated speed.

Replaces partial or slower memory configurations

Installing the full six-module set upgrades a system that currently runs fewer DIMMs or lower-speed DDR5, letting every slot operate at the rated data rate. The jump is worth it when the workload needs the full 96GB capacity and the registered architecture that keeps all channels stable under sustained load.

Practical limits of the DDR5 RDIMM interface

The registered design offloads the memory controller so all six slots can be populated at full capacity, while ECC corrects single-bit errors on the fly. The kit is spec-matched to the H14DSH motherboard's population rules; other boards or form factors such as UDIMM or SODIMM will not accept these 288-pin modules.

Puncte forte

  • 96 GB total capacity lets you run large workloads with a 6 x 16 GB kit
  • DDR5-5600 speed rated at PC5-44800 delivers the bandwidth your server expects
  • Registered ECC design corrects single-bit errors and buffers signals for full-slot stability
  • CL46 latency at 1.1 V matches the motherboard's timing and voltage requirements
  • 288-pin RDIMM form factor fits the Supermicro H14DSH memory slots exactly

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 288-pin DDR5 RDIMM modules fit the Supermicro H14DSH motherboard slots?

Yes, the 288-pin Registered DDR5 form factor matches the H14DSH memory slots exactly; UDIMM or SODIMM modules will not fit.

What is the correct population order for the six 1Rx8 modules on the H14DSH board?

Consult the H14DSH manual for the approved DIMM population sequence; installing all six 1Rx8 modules in the wrong order can prevent the system from posting.

How do I know when the ECC registered modules need replacement?

Monitor the system event log for corrected single-bit errors; a rising count signals degrading chips and the kit should be swapped before uncorrectable errors cause downtime.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.