Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Six green DDR5 RDIMM modules, bare circuit boards, 288-pin gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 96GB 6x16GB ECC RDIMM CL46 1.1V Supermicro H14DST-FL memory upgrade

SKU CH-G3M2-0ETZ1

A 96GB kit of six 16GB DDR5 ECC registered DIMMs running at 5600MHz with CL46 latency and 1.1V for the Supermicro H14DST-FL

  • Capacity96GB (6 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 6X16GB

Vedeți celelalte 30 configurații
  • 96 GB capacity across six 16 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC architecture prevents silent data corruption under load
  • 1 V operation matches the motherboard's memory controller specification
  • Verified fit for Supermicro H14DST-FL with 288-pin RDIMM form factor

96 GB DDR5-5600 ECC RDIMM kit

This 96 GB kit contains six 16 GB DDR5-5600 Registered ECC modules built for the Supermicro H14DST-FL motherboard. Each 288-pin RDIMM runs at 1.1 V with CL46 latency and 1Rx8 organisation. The registered buffer and on-die ECC let the memory controller address every slot at full rated speed.

Thermals and power at DDR5-5600

Operating at the standard 1.1 V keeps power draw low and heat output modest across all six modules. No heat spreaders are fitted, so airflow through the server chassis handles cooling without added acoustic load. The registered design reduces electrical load on the memory controller during normal operation.

Sustained load behaviour

Under continuous workloads the registered architecture maintains signal integrity across the fully populated channels. ECC corrects single-bit errors in real time, preventing silent data corruption during extended runs. The kit is validated for the H14DST-FL population rules, so all 96 GB remain stable at the rated 5600 MT/s.

Puncte forte

  • 96 GB capacity across six 16 GB modules for dense server memory
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC architecture prevents silent data corruption under load
  • 1 V operation matches the motherboard's memory controller specification
  • Verified fit for Supermicro H14DST-FL with 288-pin RDIMM form factor

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K6
Capacity96GB (6 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 6X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I install the 6x16GB DDR5 RDIMM kit in the Supermicro H14DST-FL and which slot order is correct?

Power off the server, open the chassis, and insert each 288-pin RDIMM into the DIMM slots following the population sequence printed in the H14DST-FL manual; registered modules must fill the approved channels in the exact order shown so the memory controller initialises all 96GB at DDR5-5600.

What maintenance or replacement will this ECC registered memory need over its service life?

The modules have no heat spreader and no moving parts; ECC corrects single-bit errors automatically, so the only upkeep is keeping server airflow clean and running the platform's built-in memory diagnostics during scheduled maintenance windows.

What is the first limit that appears when the kit runs at full load continuously?

Sustained throughput is bounded by the DDR5-5600 CL46 1.1V specification; the registered buffer and single-rank 1Rx8 organisation keep latency stable, so the memory controller's maximum bandwidth ceiling is reached before thermal or signal-integrity limits.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.