Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Four green 288-pin DDR5 RDIMM modules without heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 CL46 64GB 4x16GB ECC RDIMM GIGABYTE MZ33-AR1 memory upgrade

SKU CH-YW9C-MA5GE

64 GB DDR5-5600 ECC registered RDIMM kit of four 16 GB modules at CL46 1.1 V for the Gigabyte MZ33-AR1 motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Vedeți celelalte 24 configurații
  • 64 GB total capacity with four 16 GB modules for full server population
  • DDR5 5600 speed rated at PC5-44800 for rated throughput
  • CL46 CAS latency at 1.1 V for specified timing and power
  • ECC registered RDIMM design corrects single-bit errors and buffers signals
  • Verified compatible with Gigabyte MZ33-AR1 motherboard memory requirements

Exact-match DDR5-5600 ECC RDIMM kit

This 64 GB kit contains four 16 GB registered DIMMs built to the DDR5-5600 (PC5-44800) standard with CL46 latency and 1.1 V operation. The modules use a 288-pin RDIMM form factor and 1Rx8 organisation, matching the electrical and mechanical requirements of the target platform. ECC and registered buffering are included for data-integrity workloads. ||

Fits GIGABYTE MZ33-AR1 memory rules

The kit is validated for the GIGABYTE MZ33-AR1 motherboard and its DDR5-5600 registered-DIMM population rules. Builders who need unbuffered UDIMMs, SODIMMs, a different speed grade, or a lower latency than CL46 should select another product. Systems that cannot accept registered ECC modules are not supported. ||

Registered ECC with 1Rx8 rank

Registered buffering offloads the memory controller so all four slots can run fully populated at the rated 5600 MT/s, while on-die ECC corrects single-bit errors before they affect data. This rank and buffering combination is the single specification that determines whether the kit will be recognised at full capacity and speed.

Puncte forte

  • 64 GB total capacity with four 16 GB modules for full server population
  • DDR5 5600 speed rated at PC5-44800 for rated throughput
  • CL46 CAS latency at 1.1 V for specified timing and power
  • ECC registered RDIMM design corrects single-bit errors and buffers signals
  • Verified compatible with Gigabyte MZ33-AR1 motherboard memory requirements

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What motherboard must I already have for this 64GB 4x16GB DDR5 5600 CL46 ECC RDIMM kit to work?

The kit is validated for the GIGABYTE MZ33-AR1 motherboard that requires 288-pin DDR5 5600 RDIMMs at 1.1V with 1Rx8 registered ECC layout.

Can I mix this 1Rx8 registered ECC kit with other DDR5 RDIMMs already installed in the MZ33-AR1?

Mixing ranks or speeds is not recommended; the board expects identical 1Rx8 DDR5 5600 registered ECC modules in the prescribed population order for full capacity and rated speed.

How do I confirm the kit is running at DDR5 5600 CL46 1.1V after installation?

Enter the BIOS or use a hardware utility to verify the memory reports 5600 MT/s, CL46 timings, 1.1V voltage, registered ECC mode and the full 64GB across all four slots.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.