Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Twelve green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 1.1TB 12x96GB CL46 GIGABYTE MZ73-LM0 memory upgrade

SKU CH-709K-223TE

1.1 TB DDR5 5600 ECC registered RDIMM kit with twelve 96 GB modules, CL46 at 1.10 V, validated for the Gigabyte MZ73-LM0 motherboard

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Vedeți celelalte 24 configurații
  • Massive 1.1 TB capacity from twelve 96 GB modules for dense server workloads
  • DDR5 5600 speed rated at PC5-44800 delivers high memory bandwidth
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • CL46 latency at 1.10 V matches the motherboard's exact timing and voltage requirements
  • 288-pin RDIMM form factor verified for the Gigabyte MZ73-LM0 motherboard

1.1TB DDR5 5600 ECC RDIMM kit

This 1.1 terabyte kit contains twelve 96 GB DDR5 5600 registered ECC RDIMMs built for the GIGABYTE MZ73-LM0 motherboard. Each module runs at 1.10 volts with CL46 latency and a 2Rx4 organisation. The registered design lets the memory controller drive a fully populated configuration at rated speed.

Suited for MZ73-LM0 servers needing maximum capacity

Administrators expanding a GIGABYTE MZ73-LM0 to its full 1.1 TB limit will match the board's exact rank, voltage and timing requirements. Builders using consumer UDIMMs, SODIMMs or a different DDR generation cannot install these modules.

Registered ECC with 2Rx4 rank

The single specification that decides fitment is the 2Rx4 registered ECC RDIMM architecture at DDR5 5600. If the platform demands unbuffered memory, a different rank structure or another DDR generation this kit will not work.

Puncte forte

  • Massive 1.1 TB capacity from twelve 96 GB modules for dense server workloads
  • DDR5 5600 speed rated at PC5-44800 delivers high memory bandwidth
  • Registered ECC architecture corrects single-bit errors and stabilises fully populated slots
  • CL46 latency at 1.10 V matches the motherboard's exact timing and voltage requirements
  • 288-pin RDIMM form factor verified for the Gigabyte MZ73-LM0 motherboard

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How much power does the 1.10V DDR5 5600 kit draw when the server runs all day?

Each 96GB module operates at 1.10V; total draw depends on how many of the 12 DIMMs your MZ73-LM0 board populates and the workload, so consult the motherboard manual for per-slot power figures.

What must my GIGABYTE MZ73-LM0 motherboard already support to use this 12×96GB RDIMM kit?

The board needs 12 DDR5 RDIMM slots, registered ECC support, 2Rx4 rank handling, and a memory controller qualified for DDR5 5600 at CL46 — verify the exact population order in the MZ73-LM0 manual before installing.

Can I mix these CL46 2Rx4 modules with older DDR5 RDIMMs I already own?

Mixing different ranks, latencies or voltages is not supported; the MZ73-LM0 requires identical 2Rx4 CL46 1.10V modules in every populated slot to run at the rated DDR5 5600 speed.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.