Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM DDR5 5600 ECC RDIMM 96GB 2x48GB CL46 1.1V Supermicro H14SSL-NT

SKU CH-41QC-5TSKH

A 96GB DDR5 5600 ECC RDIMM kit with CL46 timing and 1.1V operation for the Supermicro H14SSL-NT motherboard

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 96 GB dual-rank kit recognised at full capacity by Supermicro H14SSL-NT
  • Registered ECC architecture corrects single-bit errors preventing silent data corruption
  • DDR5 5600 CL46 at 1.1 V matches board timing for rated speed
  • 288-pin RDIMM form factor fits the required memory slots exactly
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Supermicro H14SSL-NT DDR5 RDIMM Kit

This 96GB kit delivers two 48GB DDR5 5600 Registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14SSL-NT memory controller expects. It targets administrators who need a validated, full-capacity upgrade without manual tuning or compatibility guesswork.

Thermals Noise Power

Operating at 1.1V with no heat spreader, the modules rely on the server chassis airflow and the registered buffer to reduce electrical load on the memory controller. The lower voltage and buffered architecture keep power draw modest and acoustics unchanged in a properly cooled rack environment.

Registered ECC Architecture

The 2Rx8 Registered design offloads address and command signals so every populated slot runs at the rated 5600 MT/s, while on-die ECC corrects single-bit errors before they reach the OS. No extra software or accessories are included; the stability gain comes from the hardware implementation itself.

Puncte forte

  • 96 GB dual-rank kit recognised at full capacity by Supermicro H14SSL-NT
  • Registered ECC architecture corrects single-bit errors preventing silent data corruption
  • DDR5 5600 CL46 at 1.1 V matches board timing for rated speed
  • 288-pin RDIMM form factor fits the required memory slots exactly
  • Major OEM Samsung Micron Hynix chips deliver enterprise-grade reliability

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How do I install the 288-pin DDR5 RDIMM modules in the Supermicro H14SSL-NT and what population rule is often missed?

Power down the server, open the chassis, and insert each 48 GB module into the DIMM slots following the motherboard manual's population order; the step most people miss is verifying the exact slot sequence for a 2Rx8 registered kit so the memory controller initializes all 96 GB at the rated 5600 MT/s.

What maintenance or replacement will this DDR5 ECC RDIMM kit need over its service life?

The modules have no heat spreader and no moving parts, so no routine maintenance is required; replacement would only occur if a module fails, at which point the lifetime replacement warranty covers a direct swap of the defective 48 GB stick.

What is the first limit that appears when this registered ECC memory runs sustained workloads at 5600 MT/s?

The CAS latency of CL46 at 1.10 V sets the timing boundary; under continuous load the memory controller cannot push lower latencies or higher frequencies without violating the JEDEC-spec timing budget, so CL46 becomes the effective performance ceiling.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.