Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR5 RDIMM modules, black chips, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 32GB (2x16GB) CL46 1.1V for Supermicro H13DSH

SKU CH-N5YW-2HCD1

A 32 GB DDR5-5600 ECC Registered RDIMM kit built to the exact rank, voltage and timing the Supermicro H13DSH memory controller expects

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

Vedeți celelalte 30 configurații
  • Exact DDR5-5600 CL46 1.10V match so the Supermicro H13DSH recognises full 32GB capacity at rated speed
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors for enterprise-grade uptime
  • 2×16GB 1Rx8 kit fills two 288-pin slots per the board's population rules without guesswork
  • Major OEM Samsung Micron Hynix chips deliver consistent signal integrity across every slot
  • Lifetime replacement warranty plus free US-based technical support protects the investment long-term

Exact-match DDR5-5600 ECC RDIMM kit

This 32 GB kit (2 x 16 GB) delivers DDR5-5600 (PC5-44800) registered ECC memory at 1.1 V and CL46. It is built for the Supermicro H13DSH motherboard where the memory controller expects 1Rx8 registered DIMMs with those exact timings.

Installation and population rules

The 288-pin RDIMM form factor fits only registered DIMM slots — not UDIMM or SODIMM sockets. Server boards often require a specific population order across channels; follow the motherboard manual to avoid a no-post condition or reduced capacity.

DDR5 platform limits

DDR5 on this platform runs at the rated 5600 MT/s when the memory controller and BIOS support the full JEDEC speed. Populating every slot with registered modules can lower the maximum achievable frequency depending on the CPU and BIOS revision.

Puncte forte

  • Exact DDR5-5600 CL46 1.10V match so the Supermicro H13DSH recognises full 32GB capacity at rated speed
  • Registered ECC RDIMM architecture offloads the controller and corrects single-bit errors for enterprise-grade uptime
  • 2×16GB 1Rx8 kit fills two 288-pin slots per the board's population rules without guesswork
  • Major OEM Samsung Micron Hynix chips deliver consistent signal integrity across every slot
  • Lifetime replacement warranty plus free US-based technical support protects the investment long-term

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

How can I confirm the kit is running at DDR5 5600 with CL46 after installation?

Enter the system BIOS or UEFI and verify the memory frequency shows 5600 MT/s and the CAS latency reads 46; the registered ECC modules should also report the correct 1.1 V operating voltage.

What does the 32 GB kit contain and is anything else required?

The box includes two 16 GB 288-pin DDR5 RDIMM modules; no additional components are needed for installation in a compatible Supermicro H13DSH motherboard.

Should I choose this 2x16 GB CL46 kit or a different capacity for the H13DSH?

Select this 32 GB (2 x 16 GB) kit when your board's memory-population guide calls for 1Rx8 registered DIMMs at DDR5 5600; other capacities or ranks may not match the required configuration.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.