BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00277675BTC
În stoc
NEMIX RAM
NEMIX RAM DDR5 6400 288GB 6x48GB ECC RDIMM CL52 1.1V 2Rx8 H13SVW-NT memory upgrade
288 GB server kit of six 48 GB DDR5-6400 registered ECC RDIMMs at CL52 and 1.1 V, validated for Supermicro H13SVW-NT motherboards
- Capacity288GB (6 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 6400 (PC5 51200)
- CAS LatencyCL52
- Voltage1.10V
- ECCYes
- 288 GB total capacity from six 48 GB modules for high-density server workloads
- DDR5-6400 speed with CL52 latency delivers rated throughput at 1.1 V
- Registered ECC architecture corrects single-bit errors and buffers signals for full-slot stability
- 2Rx8 dual-rank organisation matches the Supermicro H13SVW-NT memory controller requirements
- 288-pin RDIMM form factor ensures exact mechanical and electrical fit in the target motherboard
Server Memory Kit
This 288GB kit consists of six 48GB DDR5 RDIMMs rated at 6400MHz with CL52 latency and 1.1V operation. Each module is a 2Rx8 Registered ECC DIMM built with major OEM chips for enterprise workloads. The Registered architecture reduces electrical load on the memory controller when all slots are populated.
Compatibility Focus
Designed for administrators upgrading a Supermicro H13SVW-NT motherboard that requires 288-pin Registered ECC DDR5 memory. The exact rank, voltage and timing match the board's memory-controller expectations. Builders using consumer boards, UDIMM slots or non-ECC platforms cannot use this kit.
Deciding Specification
The 2Rx8 Registered ECC organisation at 1.1V CL52 is the single specification that determines whether this kit will be recognised at full capacity and run at its rated 6400MHz speed on the target Supermicro platform.
Puncte forte
- 288 GB total capacity from six 48 GB modules for high-density server workloads
- DDR5-6400 speed with CL52 latency delivers rated throughput at 1.1 V
- Registered ECC architecture corrects single-bit errors and buffers signals for full-slot stability
- 2Rx8 dual-rank organisation matches the Supermicro H13SVW-NT memory controller requirements
- 288-pin RDIMM form factor ensures exact mechanical and electrical fit in the target motherboard
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR51200-4828K6 |
| Capacity | 288GB (6 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 6400 (PC5 51200) |
| CAS Latency | CL52 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 288GB 6X48GB DDR5 6400MHz PC5-51200 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Întrebări despre acest articol
How can I confirm the kit is running at DDR5 6400 CL52 1.10 V after installation?
Enter the BIOS or UEFI and verify the memory frequency reads 6400 MT/s, CAS latency shows CL52, and DRAM voltage is set to 1.10 V; the registered ECC modules should also report 288 GB total capacity across all six slots.
What exactly ships in the box and is anything else required?
The box contains six 48 GB DDR5 288-pin ECC registered RDIMM modules (288 GB total); no heat spreaders, cables, or additional parts are included, and no separate components are needed for installation on a compatible Supermicro H13SVW-NT motherboard.
Which capacity kit should I choose for the Supermicro H13SVW-NT?
This 288 GB kit (6 × 48 GB, 2Rx8, PC5-51200) is the exact-match upgrade validated for the H13SVW-NT; select it when your server requires the full six-DIMM population at the board's maximum supported density.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
