Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Twelve green DDR5 RDIMM modules without heat spreaders, 288-pin server memory kit

NEMIX RAM

NEMIX RAM DDR5 768GB 12x64GB 4800MHz CL40 ECC RDIMM memory upgrade

SKU CH-0AM9-GESHR

768 GB DDR5 server memory kit with twelve 64 GB registered ECC RDIMMs running at 4800 MHz CL40 and 1.1 V for the ASRock Rack GENOAD12M3-2Q motherboard

  • Capacity768GB (12 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 12X64GB

Vedeți celelalte 4 configurații
  • 768GB total capacity from 12 x 64GB modules maximises server memory density
  • DDR5 4800MHz PC5-38400 speed matches the motherboard's rated frequency for full performance
  • CL40 CAS latency at 1.1V delivers the exact timing and voltage the memory controller expects
  • ECC and Registered RDIMM architecture corrects single-bit errors and buffers signals for stable full-population operation
  • 288-pin 2Rx4 form factor fits the ASRock Rack GENOAD12M3-2Q motherboard's required DIMM type and rank configuration

Capacity and compatibility

This NEMIX RAM kit delivers 768GB of DDR5 registered ECC memory across twelve 64GB modules. It is built for the ASRock Rack GENOAD12M3-2Q motherboard and matches the board's DDR5 4800 PC5-38400 specification.

Who this suits and who it does not

The 2Rx4 registered design with ECC suits servers that require full-slot population and single-bit error correction. Systems limited to UDIMM or SODIMM form factors, or those without registered ECC support, cannot use this kit.

Installation notes

Each module uses the standard 288-pin RDIMM form factor and operates at 1.1V, so it seats in the board's DDR5 slots without extra power cables. The main risk is ignoring the motherboard manual's population order, which can prevent the system from recognising the full 768GB capacity.

Puncte forte

  • 768GB total capacity from 12 x 64GB modules maximises server memory density
  • DDR5 4800MHz PC5-38400 speed matches the motherboard's rated frequency for full performance
  • CL40 CAS latency at 1.1V delivers the exact timing and voltage the memory controller expects
  • ECC and Registered RDIMM architecture corrects single-bit errors and buffers signals for stable full-population operation
  • 288-pin 2Rx4 form factor fits the ASRock Rack GENOAD12M3-2Q motherboard's required DIMM type and rank configuration

Specificații

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K12
Capacity768GB (12 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASRock Rack
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 12X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What motherboard must I already have for this 12-module DDR5 kit to be recognised at full 768GB capacity?

The kit is validated for the ASRock Rack GENOAD12M3-2Q motherboard running DDR5 4800 PC5-38400; install all twelve 288-pin RDIMMs in the slots specified by that board's manual.

Will the 2Rx4 registered ECC modules run reliably in the remaining DDR5 slots if I keep older RDIMMs of a different rank or speed?

Mixing ranks, speeds or voltages is not supported; the board's memory controller expects every populated slot to match the 4800MHz 1.1V CL40 2Rx4 specification exactly.

How can I confirm the 768GB kit is operating at its rated 4800MHz CL40 after installation?

Enter the BIOS or use a hardware inventory tool and verify the memory frequency reads 4800 MT/s, CAS latency shows CL40, and total capacity reports 768GB with ECC active.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.