BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 USD
0.00279313BTC
În stoc
NEMIX RAM
NEMIX RAM MD25600-818K6 48GB (6x8GB) DDR4 3200 CL22 288-pin UDIMM memory upgrade
48GB six-module DDR4 3200 kit with CL22 timing, 1.20V operation, and 288-pin UDIMM form factor for Thinkmate GPX-WS-540X1 workstations
- Capacity48GB (6 x 8GB)
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 48GB capacity with six 8GB modules for high-density workstation memory
- DDR4 3200 speed rated at PC4-25600 for fast data throughput
- CL22 CAS latency at 1.20V for efficient low-voltage operation
- 288-pin UDIMM form factor compatible with ThinkMate GPX-WS-540X1 workstation
- Non-ECC unbuffered design using Samsung Micron Hynix chipsets for reliable performance
Capacity and fit
This 48 GB kit delivers six 8 GB DDR4 3200 modules built for the ThinkMate GPX-WS-540X1 workstation. It targets IT professionals and power users who need maximum supported memory in that specific platform.
Build and connectivity
Each stick is a 288-pin UDIMM running at 1.20 V with CL22 timings and a 1Rx8 layout using major OEM DRAM chips. The unbuffered non-ECC design slots straight into standard desktop DIMM sockets without extra cabling or cooling hardware.
Upgrade context
The kit replaces smaller-capacity DDR4 sets when workloads demand the full 48 GB ceiling of the compatible workstation. It is not suited for systems that require registered or ECC memory, nor for platforms limited to lower densities or slower speeds.
Puncte forte
- 48GB capacity with six 8GB modules for high-density workstation memory
- DDR4 3200 speed rated at PC4-25600 for fast data throughput
- CL22 CAS latency at 1.20V for efficient low-voltage operation
- 288-pin UDIMM form factor compatible with ThinkMate GPX-WS-540X1 workstation
- Non-ECC unbuffered design using Samsung Micron Hynix chipsets for reliable performance
Specificații
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K6 |
| Capacity | 48GB (6 x 8GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | THINKMATE |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 48GB (6X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM KIT |
Întrebări despre acest articol
Does the DDR4-3200 PC4-25600 interface limit throughput on the ThinkMate GPX-WS-540X1?
The kit runs at DDR4 3200 (PC4-25600), so maximum bandwidth is capped at that data rate regardless of motherboard capability.
What physical clearance is required for the 288-pin UDIMM modules without heat spreaders?
Each module is a standard-height 288-pin UDIMM with no heat spreader, fitting typical desktop DIMM slots and low-profile CPU coolers.
How are the six 1Rx8 modules installed, and which slot order mistake should be avoided?
Populate all six slots following the motherboard’s channel sequence (usually alternating channels); the common error is filling one channel completely before the second.
Tot din acest raion
Clienții au comparat și acestea.
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
