Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare

NEMIX RAM

NEMIX RAM Synology 16GB (2x8GB) DDR4 2666 ECC SODIMM memory upgrade

SKU CH-QQ6M-8RYTQ

A 16 GB DDR4 ECC SODIMM kit running at 2666 MHz with CL19 latency and 1.2 V operation, built for Synology NAS upgrades

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection guards data integrity during critical workloads
  • DDR4 2666 speed handles demanding NAS applications smoothly
  • 16 GB kit expands capacity for heavier multitasking
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits Synology NAS slots precisely

Synology DDR4 2666 ECC SODIMM kit

This 16GB kit contains two 8GB DDR4 2666 ECC unbuffered SODIMM modules built for compatible Synology NAS units. Each module runs at 1.2V with CL19 timing and uses a 260-pin layout. It targets administrators who need verified ECC memory for data integrity in supported systems.

DDR4 2666 speed and ECC unbuffered limits

The DDR4 2666 interface caps transfer rates at the rated speed, so faster modules will not exceed this ceiling. ECC unbuffered operation requires explicit motherboard support; systems without ECC capability cannot use the error-correction function. Mixing with non-ECC or registered DIMMs is not supported by the memory controller.

2x8GB 260-pin CL19 1.2V specification

The kit delivers 16GB total capacity across two 1Rx8 modules at 1.2V with CL19 latency. Buyers whose NAS requires a different voltage, pin count, rank configuration or latency value should verify compatibility before purchase. Systems limited to single-module population or non-ECC memory cannot use this kit.

Puncte forte

  • ECC protection guards data integrity during critical workloads
  • DDR4 2666 speed handles demanding NAS applications smoothly
  • 16 GB kit expands capacity for heavier multitasking
  • 2 V operation reduces power draw and heat
  • 260-pin SODIMM form factor fits Synology NAS slots precisely

Specificații

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR4 2666MHZ ECC Unbuffered SODIMM
Part NumberMSE21300-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSynology
CAS LatencyCL19
Heat SpreaderNo
Type260-PIN DDR4 ECC SODIMM
Rank1Rx8
FeaturesDDR4 ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 260-PIN ECC Unbuffered SODIMM KIT

Întrebări despre acest articol

Should I pick the 16GB (2 x 8GB) kit or a single 8GB module for my Synology?

The 16GB kit provides two matched 8GB modules for dual-channel operation, while a single module runs in single-channel mode.

What does the 2666 MHz speed deliver in a Synology NAS?

The DDR4 2666 modules run at up to 2666 MT/s, giving a peak bandwidth of PC4-21300 for supported Synology models.

Does the 260-pin ECC SODIMM interface limit capacity or speed in my Synology?

The 260-pin DDR4 ECC SODIMM form factor fits Synology slots that accept 1Rx8 unbuffered modules at 1.2 V.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.