Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small black 35 mm DC blower fan with three‑wire connector

OEM Industries

OEM Industries AB3505HB-GA3 35mm 5V 3-Pin CPU cooler

SKU CH-626E-7VEM6

A 35 mm DC blower fan with a 3-pin connector runs at 5 V and 0.11 A for notebook cooling

  • ColorBlack
  • TypeFan only
  • Fan Size35mm
  • Power Connector3 Pin
  • LEDNo
  • 35 mm blower fits tight notebook chassis
  • 5 V 0.11 A draw keeps power use low
  • 3-wire connector enables speed monitoring
  • ADDA 3510 series built for continuous operation
  • Fan-only design simplifies drop-in replacement

Compact 35 mm DC blower for notebook cooling

The OEM Industries AB3505HB-GA3 is a 35 mm DC blower designed for notebook thermal management. It operates at 5 V with a 0.11 A draw and connects via a three-wire lead. The black fan-only unit fits tight internal spaces where a slim axial profile is required.

Suitable for servicing compatible notebooks.

Technicians repairing or maintaining a notebook that specifies this exact 3510 blower model will find a direct match. Builders working on desktop CPU sockets, full-size graphics cards or any chassis requiring a larger fan format should look at something else.

35 mm frame with 5 V three-pin power

The 35 mm square frame and 5 V three-pin connector are the decisive specifications for fit and electrical compatibility. Verify both dimensions and pin-out against the original part before ordering.

Puncte forte

  • 35 mm blower fits tight notebook chassis
  • 5 V 0.11 A draw keeps power use low
  • 3-wire connector enables speed monitoring
  • ADDA 3510 series built for continuous operation
  • Fan-only design simplifies drop-in replacement

Specificații

ModelAB3505HB -GA3
ColorBlack
TypeFan only
Fan Size35mm
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

How do I connect the 3-pin connector to a notebook fan header?

Align the three wires with the 5 V header pins, press straight down until seated, and verify the tachometer wire is on the correct pin so speed reporting works.

When should the blower be cleaned or replaced?

Expect to blow dust out of the 35 mm impeller every few months; replace the unit if bearing noise appears or airflow drops noticeably.

At what current draw does the 5 V supply become the limiting factor?

The blower draws 0.11 A, so any 5 V rail rated below that will hit its current limit first under sustained load.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.