Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small black 40mm square fan with two wires and a 2-pin connector

OEM Industries

OEM Industries DFS401012H 40mm 12V 1.2W 2-pin CPU cooler

SKU CH-GC4F-RAC30

A 40 mm sleeve-bearing fan runs on 12 V and draws 1.2 W through a 2-pin connector

  • ColorBlack
  • TypeFan only
  • Bearing TypeSleeve Bearing
  • Power Connector2 Pin
  • LEDNo
  • Compact 40 mm frame fits tight micro cases
  • 12 V 1.2 W draw keeps power use low
  • Two-pin connector enables simple motherboard control
  • Sleeve bearing runs quietly at idle
  • Suitable for CPU or hard-drive spot cooling

40 mm 12 V Sleeve-Bearing Fan

The OEM Industries DFS401012H is a 40 mm square fan with a 10 mm thickness. It runs on 12 V power and draws 1.2 W through a two-pin connector. The black frame houses a sleeve bearing and no LED lighting.

Suitable for tight chassis spots and drive cooling

This fan fits micro cases and can serve as a hard-disk cooler where space is limited. Builders needing higher airflow, PWM speed control or a three- or four-pin header should look elsewhere.

Steady low-power operation under load

The sleeve bearing and fixed 1.2 W draw deliver consistent airflow during extended use. Without PWM regulation the speed stays constant, so acoustic output does not change with temperature spikes.

Puncte forte

  • Compact 40 mm frame fits tight micro cases
  • 12 V 1.2 W draw keeps power use low
  • Two-pin connector enables simple motherboard control
  • Sleeve bearing runs quietly at idle
  • Suitable for CPU or hard-drive spot cooling

Specificații

ModelDFS401012H
ColorBlack
TypeFan only
Bearing TypeSleeve Bearing
Power Connector2 Pin
LEDNo

Întrebări despre acest articol

What power source do I need to run the 12 V 1.2 W DFS401012H fan?

Connect the 2-pin plug to a 12 V fan header on your motherboard or to a 12 V Molex adapter; the fan draws 1.2 W at full speed.

Will the 40 mm sleeve-bearing fan fit in the same mount as my older 40 mm cooler?

Yes, the 40 × 10 mm frame matches standard 40 mm mounting holes, so it replaces most legacy 40 mm fans without modification.

How can I confirm the DFS401012H is spinning correctly after installation?

Power the system and watch the black blades rotate; you should feel a steady airflow from the 40 mm frame and hear only a low hum from the sleeve bearing.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.