Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 60mm square fan with 2-pin connector

OEM Industries

OEM Industries FD1260-S3012C 60mm 2-pin CPU cooler

SKU CH-G69Z-5AHR4

A 60 mm ball-bearing fan with a 2-pin connector draws 0.13 A at 12 V for compact CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size60mm
  • Bearing TypeBall
  • Power Connector2 Pin
  • LEDNo
  • Compact 60 mm fan fits tight chassis spaces
  • Ball bearing design extends operational lifespan
  • Low 0.13 A draw reduces power load
  • Simple 2-pin connector enables quick installation
  • Black finish blends with standard build aesthetics

Compact 60 mm CPU cooler for tight builds

The OEM Industries FD1260-S3012C is a 60 mm square fan designed to mount directly on low-profile heatsinks in small-form-factor systems. It draws 0.13 A at 12 V and uses a two-pin DC connector, so speed control depends on voltage regulation from the motherboard header. The ball bearing is rated for continuous operation in always-on environments.

Ball bearing and two-pin power for simple

Black plastic frame and blades keep weight low while the 15 mm thickness fits standard 60 mm mounting holes without clearance issues. No LED lighting means no extra cables or header requirements. The two-wire lead plugs into any 12 V fan header; PWM control is not supported, so the fan runs at full speed unless the board reduces voltage.

Replaces noisy or failed 60 mm stock fans

This unit serves as a direct swap for worn original coolers in embedded boards, thin clients or rackmount servers where 60 mm is the only compatible footprint. The jump is worth it when the original sleeve-bearing fan has developed rattle or stalled, and a ball-bearing replacement restores reliable airflow without modifying the mounting pattern.

Puncte forte

  • Compact 60 mm fan fits tight chassis spaces
  • Ball bearing design extends operational lifespan
  • Low 0.13 A draw reduces power load
  • Simple 2-pin connector enables quick installation
  • Black finish blends with standard build aesthetics

Specificații

ModelFD1260-S3012C
ColorBlack
TypeFan only
Fan Size60mm
Bearing TypeBall
Power Connector2 Pin
LEDNo

Întrebări despre acest articol

What voltage and current does the 2-pin connector on the FD1260-S3012C draw?

The fan runs on 12 V DC and draws 0.13 A through its 2-pin connector.

What are the exact mounting dimensions for the FD1260-S3012C?

The frame measures 60 mm by 60 mm with a 15 mm thickness, matching standard 6015 mounting holes.

How do I connect the 2-pin FD1260-S3012C to a 4-pin motherboard header?

Align the two pins with the outer two pins of the 4-pin header; the fan will run at full speed without PWM control.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.