Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black square 70mm maglev fan only no LED

OEM Industries

OEM Industries GM1207PKVX-A 70mm Maglev CPU cooler

SKU CH-FGBN-KB6B6

A 70 mm maglev fan cooler delivering 12 V, 2.5 W airflow for compact CPU or case cooling

  • ColorBlack
  • TypeFan only
  • Fan Size70mm
  • Bearing TypeMaglev
  • Power Connector3 Pin
  • LEDNo
  • 70 mm Maglev bearing delivers quiet, long-life airflow
  • 12 V 2.5 W rating keeps power draw low
  • 3-pin connector enables direct motherboard speed control
  • Square 70×20 mm frame fits tight projector-style cases
  • Black finish matches stealth builds without LED distraction

70 mm Maglev CPU Cooler

The OEM Industries GM1207PKVX-A is a square 70 mm fan unit with Maglev bearing technology. It draws 2.5 W at 12 V and connects via a standard 3-pin power header. The black frame measures 7020 format and suits compact chassis or projector-style builds.

Upgrade from Sleeve Bearing Fans

This cooler replaces older 70 mm sleeve or ball-bearing fans that develop noise or vibration over time. The Maglev design reduces friction, extending service life in always-on systems. The jump is worth it when acoustic consistency matters more than raw airflow in tight enclosures.

Check 3-Pin Header and Clearance

Verify the motherboard or fan controller provides a 3-pin connector; PWM control is not supported on this model. Confirm 70 mm mounting holes and 20 mm depth fit within the case or heatsink assembly. Ensure 12 V supply matches the unit's rated input.

Puncte forte

  • 70 mm Maglev bearing delivers quiet, long-life airflow
  • 12 V 2.5 W rating keeps power draw low
  • 3-pin connector enables direct motherboard speed control
  • Square 70×20 mm frame fits tight projector-style cases
  • Black finish matches stealth builds without LED distraction

Specificații

ModelGM1207PKVX-A
ColorBlack
TypeFan only
Fan Size70mm
Bearing TypeMaglev
Power Connector3 Pin
LEDNo

Întrebări despre acest articol

What are the exact dimensions of the square cooler so I can verify case clearance?

The cooler measures 70 mm by 70 mm with a 20 mm thickness, matching the SUNON 7020 form factor.

How do I connect the three-pin power connector and what is the common wiring mistake?

Align the three-pin plug with the motherboard fan header, matching the keyed tab; the mistake is forcing it on offset by one pin, which leaves the tachometer wire unconnected.

When should I plan to replace the maglev fan in this 12 V 2.5 W cooler?

Maglev bearings eliminate contact wear, so replacement is only needed if the rotor becomes unbalanced or the motor fails, which typically occurs after many years of continuous operation.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.