Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Small black frameless CPU cooler fan with four mounting pins and four-wire connector

OEM Industries

OEM Industries PLD05010B12L 12V .1A 4-pin frameless CPU cooler

SKU CH-KH9P-A3KN6

Frameless 12 V fan with a 4-pin connector draws .1 A for compact CPU or video-card cooling

  • ColorBlack
  • TypeFan only
  • Power Connector4 Pin
  • LEDNo
  • Frameless design saves space in tight builds
  • 12V .1A draw keeps power use low
  • 4-pin connector enables precise speed control
  • Three mounting holes simplify installation on compatible boards
  • Black finish matches dark-themed systems

Compact frameless cooler for tight builds

The OEM Industries PLD05010B12L is a 12V 0.1A frameless fan designed for CPU air cooling where space is limited. Its four-pin connector enables PWM speed control on compatible headers. The unit uses three mounting holes for installation on supported heatsinks or brackets. It suits builders assembling small-form-factor systems or replacing a worn proprietary cooler.

Steady airflow at constant voltage

Under sustained load the fan maintains a fixed 12V supply and draws 0.1A continuously. The four-wire interface allows the motherboard to regulate RPM without voltage throttling. Because the frame is absent, airflow depends entirely on the heatsink geometry it is paired with. Performance scales linearly with the thermal mass and fin density of the attached cooler.

Low power draw and minimal noise

At 0.1A the cooler adds only a small load to the 12V rail, leaving headroom for other components. The frameless design eliminates frame resonance, so acoustic output is dominated by blade passage frequency. Without LED illumination there is no extra current draw or light bleed in dark chassis. Typical operation stays quiet in office or home-theatre environments.

Puncte forte

  • Frameless design saves space in tight builds
  • 12V .1A draw keeps power use low
  • 4-pin connector enables precise speed control
  • Three mounting holes simplify installation on compatible boards
  • Black finish matches dark-themed systems

Specificații

ModelPLD05010B12L
ColorBlack
TypeFan only
Power Connector4 Pin
LEDNo

Întrebări despre acest articol

How loud is the PLD05010B12L when it runs continuously at 12 V?

The frameless fan draws 0.1 A at 12 V, so its power consumption stays low during all-day operation, keeping noise and heat minimal.

What does the cooler need to connect to a motherboard?

It uses a standard 4-pin PWM connector, so you need a 4-pin CPU fan header on the board.

Will the three mounting holes line up with my existing heatsink?

The fan has three mounting holes; check your heatsink’s hole pattern to confirm they match before installing.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.