Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 75mm square blower fan, 30mm thick, two-wire connector

OEM Industries

OEM Industries SHBC7530BH 75mm 12V 0.36A 4.32W CPU cooler

SKU CH-6P23-A6ZT4

A 75 mm DC brushless blower fan rated at 12 V, 0.36 A and 4.32 W with a two-wire 2-pin connection

  • ColorBlack
  • TypeFan only
  • Fan Size75mm
  • LEDNo
  • Compact 75 mm blower fits tight builds
  • 12 V DC brushless motor runs quietly
  • Low 0.36 A draw keeps power use minimal
  • 32 W rating balances airflow and efficiency
  • Two-wire 2-pin connector enables simple installation

Compact 75 mm Blower for Tight Builds

The OEM Industries SHBC7530BH is a 75 mm DC brushless blower designed for compact CPU air-cooling setups. Its two-wire, two-pin connection integrates directly into standard headers without extra adapters. The unit suits builders who need a low-profile airflow solution in space-constrained chassis. It is not intended for high-TDP processors that demand large heatsink arrays or liquid cooling loops.

Thermals and Power in Daily Operation

Running at 12 V and 0.36 A, the blower draws 4.32 W while moving air through the heatsink. The brushless motor keeps acoustic output low during typical desktop workloads. Steady power draw means minimal impact on the system’s overall thermal budget. No LED lighting is present, so the fan adds no visual distraction in darkened environments.

Included Hardware and Software Impact

The package contains only the blower unit itself; no mounting brackets, thermal compound or speed-control cables are supplied. Builders must provide their own retention hardware compatible with the 75 mm by 75 mm by 30 mm frame. Without bundled software, fan curves rely entirely on motherboard BIOS or third-party utilities. This makes the cooler a pure hardware addition with no automated tuning layer.

Puncte forte

  • Compact 75 mm blower fits tight builds
  • 12 V DC brushless motor runs quietly
  • Low 0.36 A draw keeps power use minimal
  • 32 W rating balances airflow and efficiency
  • Two-wire 2-pin connector enables simple installation

Specificații

ModelSHBC7530BH
ColorBlack
TypeFan only
Fan Size75mm
LEDNo

Întrebări despre acest articol

How do I connect the 2-pin power lead on the SHBC7530BH, and which step do people often miss?

Plug the 2-pin connector into a 12 V fan header, matching the red wire to the positive pin and the black wire to ground; the step many miss is confirming the header supplies 12 V rather than a lower voltage.

What part of the SHBC7530BH will need replacement first during long-term use?

The brushless motor bearings are the only wearing component; when noise or vibration increases, the entire blower unit is replaced because the fan is not serviceable.

At what point does the 4.32 W power limit of the SHBC7530BH become the bottleneck under sustained load?

When the blower runs continuously at 12 V and 0.36 A, the 4.32 W ceiling caps airflow, so the thermal limit of the heatsink it serves is reached before the fan can spin faster.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.