Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Black 90mm square CPU cooler with 4-pin connector

OEM Industries

OEM Industries T92E12BMA7-07 90mm 12V 0.66A 4-pin CPU cooler

SKU CH-83QF-PCMZH

90 mm square fan with ball bearing and 4-pin PWM control for 12 V case or CPU cooling

  • ColorBlack
  • TypeFan only
  • Fan Size90mm
  • Bearing TypeBall
  • Power Connector4 Pin
  • LEDNo
  • Reliable long-life operation with ball bearing
  • Precise speed control via 4-pin PWM connector
  • Fits compact builds with 90mm square frame
  • Efficient 12V 0.66A power draw
  • Trusted Nidec 9038 motor quality

OEM Industries 90 mm 4-Pin CPU Cooler

This OEM Industries cooler is a 90 mm square fan unit designed for CPU air cooling in compatible cases. It runs on 12 V at 0.66 A and connects via a standard 4-pin power connector. The black frame houses a ball-bearing fan without LED lighting. The unit is supplied new and intended for case-mounted installations.

Suits compact case builds needing a 90 mm mount

Builders fitting a 90 mm square mounting pattern with a 4-pin header will find this cooler a direct match. It is not suited for systems requiring a larger mounting footprint or a different hole spacing. Buyers needing integrated heatsink mass or alternative bearing types should look elsewhere. The simple fan-only design targets straightforward replacement scenarios.

90 mm square mounting with 4-pin power

The decisive specification is the 90 mm square frame paired with a 4-pin PWM power connector. This combination dictates whether the cooler fits the case cut-out and connects to the motherboard header. Verify both dimensions and pin count before purchase. No other specifications override this mechanical and electrical interface.

Puncte forte

  • Reliable long-life operation with ball bearing
  • Precise speed control via 4-pin PWM connector
  • Fits compact builds with 90mm square frame
  • Efficient 12V 0.66A power draw
  • Trusted Nidec 9038 motor quality

Specificații

ModelT92E12BMA7-07
ColorBlack
TypeFan only
Fan Size90mm
Bearing TypeBall
Power Connector4 Pin
LEDNo

Întrebări despre acest articol

How loud is the 90 mm ball-bearing fan when it runs continuously at 12 V?

The 90 mm ball-bearing fan draws 0.66 A at 12 V and spins constantly, producing a steady airflow noise typical for a 9038-style cooler under full load.

Does the 4-pin connector require a PWM header on the motherboard to operate?

The cooler uses a standard 4-pin power connector; it will run on any 12 V fan header, though PWM control needs a compatible motherboard header.

Will the 90 mm square frame fit the mounting holes on my existing case fan brackets?

The 90 mm square frame matches common 90 mm case mounting patterns, so it aligns with standard 90 mm screw holes on older chassis.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.