Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green DDR3 ECC registered DIMMs with gold contacts

OWC

OWC 16GB (2x8GB) DDR3 1333 ECC RDIMM Kit SuperBlade 7126T/7226T

SKU CH-ASYH-GNQXE

16 GB DDR3 1333 ECC registered RDIMM kit for Supermicro SuperBlade 7126T and 7226T servers

  • Capacity16GB (2 x 8GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCYes

Capacity 16GB (2 x 8GB)

  • ECC registered design prevents data corruption in servers
  • 16 GB kit (2 × 8 GB) expands blade capacity
  • DDR3 1333 MHz CL9 matches SuperBlade 7126T/7226T specs
  • 5 V 240-pin RDIMM fits registered DIMM slots
  • Replaces six Supermicro part numbers for easy sourcing

System-specific DDR3 ECC kit

This 16GB kit contains two 8GB registered DIMMs built for Supermicro SuperBlade 7126T and 7226T series servers. Each module runs at 1333MHz with CL9 latency at 1.5V and uses a 2Rx4 organisation. The memory is ECC registered and will not work in standard desktop computers or alongside unbuffered modules.

JEDEC-compliant registered DIMMs

The modules meet JEDEC and RoHS specifications and are tested in-house before shipment. They replace Supermicro part numbers including MEMDR380LCL01ER13 and MEMDR380LSL06ER13. No heat spreaders are fitted, keeping the 240-pin form factor compatible with dense blade chassis. The kit provides a direct upgrade path for supported SuperBlade platforms.

Suited for blade-server maintenance

This kit suits administrators extending the life of SuperBlade 7126T or 7226T systems with validated ECC registered memory. It is not for desktop PCs, workstations that require unbuffered DIMMs, or any platform outside the listed SuperBlade series. Builders needing different capacities, speeds or form factors should look elsewhere.

Puncte forte

  • ECC registered design prevents data corruption in servers
  • 16 GB kit (2 × 8 GB) expands blade capacity
  • DDR3 1333 MHz CL9 matches SuperBlade 7126T/7226T specs
  • 5 V 240-pin RDIMM fits registered DIMM slots
  • Replaces six Supermicro part numbers for easy sourcing

Specificații

BrandOWC
Part Number1R3D32R4016P
Capacity16GB (2 x 8GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperBlade 7126T Series
Supermicro SuperBlade 7226T Series

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 240-pin DDR3 RDIMMs need any firmware updates or pairing when I add them to a SuperBlade 7126T?

No firmware or pairing is required; the 2Rx4 registered modules are JEDEC-compliant and install directly into the 240-pin slots.

What is the first limit reached when the 1333 MHz kit runs continuously in a SuperBlade 7226T?

The CL9 latency at 1.5 V sets the sustained throughput ceiling for the DDR3 1333 registered DIMMs.

How much heat and power do the two 8 GB ECC registered sticks produce under all-day load?

Each 1.5 V DDR3 RDIMM draws standard registered-DIMM power without a heat spreader, so total heat stays within normal server DIMM limits.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.