OWC 32GB (2x16GB) DDR4 2666MHz CL19 ECC SODIMM 1.2V QNAP NAS memory upgrade
- 32GB (2 x 16GB)
- 260-Pin DDR4 ECC SO…
Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.
OWC
A 16 GB DDR4 ECC SODIMM running at 2666 MHz with CL19 latency for Synology NAS and micro-servers
Capacity 16GB
This 16GB DDR4 2666MHz ECC SODIMM is built for Synology NAS units and other micro servers that require error-correcting memory. The unbuffered 2Rx8 module runs at 1.2V and fits the standard 260-pin SO-DIMM slot found in compatible Synology systems such as the D4ECSO-2666-16G and D4ES01-16G.
It upgrades from 2133MHz or 2400MHz DDR4 ECC SODIMMs while maintaining full backward compatibility. The jump is worth it when your Synology NAS shows memory pressure during heavy file serving, virtualization or database workloads that benefit from the higher 2666MHz data rate and CL19 latency.
Installation follows the usual SO-DIMM procedure: power down the NAS, open the memory compartment, align the notch on the 260-pin module, insert at an angle and press down until the clips lock. What usually goes wrong is mixing ECC with non-ECC modules or populating slots in the wrong order for the specific Synology model; consult the system manual for the approved configuration.
| Brand | OWC |
|---|---|
| Part Number | 2C6D42R816GB |
| Capacity | 16GB |
| Type | 260-Pin DDR4 ECC SODIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Synology |
Alte versiuni ale acestui model
Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.
Yes — the module uses the standard 260-pin DDR4 SODIMM form factor that Synology D4ECSO-2666-16G and D4ES01-16G systems require.
Align the notch with the slot key, press the module in at a slight angle until the gold contacts disappear, then push down firmly until both side clips click — the most common mistake is stopping before the clips engage.
The memory itself has no moving parts and is rated for the life of the system; replacement is only needed if you add capacity or a diagnostic tool reports correctable errors that exceed the platform threshold.
Tot din acest raion
Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.
În ce monedă plătiți și în ce monedă citiți prețurile.
Trimis din portofelul dumneavoastră la finalizarea comenzii
Doar pentru afișare — catalogul este exprimat în dolari
Nicio monedă nu corespunde.
Alegeți limba în care vă vorbește site-ul.
Nicio limbă nu corespunde.
Prima vizită?
Aveți deja un cont?
Nu există o resetare automată: acest magazin nu trimite niciun e-mail, deci nu există niciun link de unică folosință de solicitat. Lăsați adresa în cont. Va fi tratată manual.
Cerere înregistrată
Nu veți primi nimic în căsuța de e-mail — acest magazin nu trimite niciun e-mail. Cineva se ocupă de asta manual.
V-ați amintit-o?