Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green 288-pin DDR5 UDIMM module without heat spreader

OWC

OWC 16GB DDR5 4800 CL40 1Rx8 288-pin 1.1V Non-ECC UDIMM memory upgrade

SKU CH-1YQE-7GNQX

A 16 GB DDR5 4800 CL40 UDIMM upgrade for OptiPlex 7000 Tower, 7010 SFF Plus, 7010 Tower Plus and XE4 Tower

  • Capacity16GB
  • Type288-Pin DDR5 Non-ECC UDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.1V
  • ECCNo
  • 16 GB DDR5 4800 CL40 boosts multitasking speed
  • JEDEC-standard 1.1 V module ensures warranty-safe upgrade
  • Single 1Rx8 288-pin UDIMM fits four OptiPlex models
  • Unbuffered non-ECC design simplifies DIY installation
  • Replaces Dell part numbers AB883074 AC027075 SNPG00XJC/16G SNPK7G24C/16G

Compatible DDR5 upgrade for Dell OptiPlex

This 16GB DDR5 4800 module is built for Dell OptiPlex 7000 Tower, 7010 SFF Plus, 7010 Tower Plus and XE4 Tower systems. It delivers a JEDEC-standard PC5-38400 speed at 1.1V with CL40 latency in a single unbuffered UDIMM. The upgrade is designed for owners of these specific desktops who want a straightforward capacity increase.

Suitable for listed OptiPlex desktops only

The module fits the four OptiPlex models named above and replaces Dell part numbers AB883074, AC027075, SNPG00XJC/16G and SNPK7G24C/16G. Builders using any other motherboard, laptop, workstation or server platform should look elsewhere because the pin-out, voltage and SPD programming are tailored to these systems.

16GB capacity in a single 1Rx8 UDIMM

Each stick provides 16GB organised as one rank by eight chips on a 288-pin DDR5 UDIMM. This density means one slot adds 16GB without mixing ranks, which is the deciding factor when the board has limited slots or requires single-rank population rules.

Puncte forte

  • 16 GB DDR5 4800 CL40 boosts multitasking speed
  • JEDEC-standard 1.1 V module ensures warranty-safe upgrade
  • Single 1Rx8 288-pin UDIMM fits four OptiPlex models
  • Unbuffered non-ECC design simplifies DIY installation
  • Replaces Dell part numbers AB883074 AC027075 SNPG00XJC/16G SNPK7G24C/16G

Specificații

BrandOWC
Part Number4U8D51R816GB
Capacity16GB
Type288-Pin DDR5 Non-ECC UDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.1V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemDell OptiPlex 7000 Tower
Dell OptiPlex 7010 SFF Plus
Dell OptiPlex 7010 Tower Plus
Dell OptiPlex XE4 Tower

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 1Rx8 rank layout ever need to be changed or the module replaced?

The module is a single 16 GB 1Rx8 DDR5 UDIMM; no internal components are serviceable, so replacement would only be needed if the stick itself fails.

What limit appears first when the memory runs continuously at 4800 MT/s CL40?

The JEDEC-standard 1.1 V operating voltage and CL40 latency define the sustained performance envelope; the module has no heat spreader, so thermal headroom is set by the system's airflow.

How much heat or noise does the bare 288-pin DIMM add during all-day operation?

With no heat spreader and a low 1.1 V DDR5 design, the module produces minimal extra heat and adds no audible noise; system fan behaviour depends on the OptiPlex chassis.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.