Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Two green circuit boards with gold edge connectors and black memory chips

OWC

OWC 256GB (2x128GB) DDR4 2933 PC4-23400 CL21 4Rx4 288-pin 1.2V ECC LRDIMM memory upgrade

SKU CH-30VB-JYN9R

256 GB DDR4-2933 ECC LRDIMM kit (2×128 GB) validated for Supermicro X11 server and workstation boards

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR4 ECC LRDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.2V
  • ECCYes

Capacity 256GB (2 x 128GB)

  • 256GB total capacity with two 128GB modules for high-density server memory
  • DDR4 2933MHz PC4-23400 speed with CL21 latency for responsive workloads
  • ECC load-reduced design detects and corrects data errors in critical systems
  • 2V operation reduces power draw while maintaining 2933MHz performance
  • Compatible with Supermicro X11DPD-L, X11DPD-M25, X11DPFF-SNR, X11QPL and X11SPA-T motherboards

Server-grade ECC LRDIMM kit

This 256GB kit provides two 128GB DDR4 2933 PC4-23400 CL21 4Rx4 288-pin 1.2V ECC Load Reduced DIMMs. It is built for Supermicro X11 series motherboards including X11DPD-L, X11DPD-M25, X11DPFF-SNR, X11QPL and X11SPA-T. The modules target servers, workstations and NAS systems that require registered ECC memory with load-reduced buffering. They will not work in standard desktop computers or alongside unbuffered or registered ECC DIMMs.

Load-reduced ECC architecture

The single specification that decides fit is the Load Reduced ECC design combined with 4Rx4 organisation. This electrical interface differs from standard registered ECC and unbuffered DIMMs, so the motherboard memory controller must explicitly support LRDIMM operation. Mixing with other ECC types is not supported and will prevent boot or cause data errors.

Sustained server workloads

Under continuous load the modules operate at the rated 2933 MT/s with CL21 latency at 1.2V, and they are backward compatible with 2133, 2400 and 2666 MT/s bus speeds. JEDEC-standard construction and 100% factory testing ensure stable throughput during extended compute, virtualisation or storage tasks without the error accumulation that can occur with non-ECC memory.

Puncte forte

  • 256GB total capacity with two 128GB modules for high-density server memory
  • DDR4 2933MHz PC4-23400 speed with CL21 latency for responsive workloads
  • ECC load-reduced design detects and corrects data errors in critical systems
  • 2V operation reduces power draw while maintaining 2933MHz performance
  • Compatible with Supermicro X11DPD-L, X11DPD-M25, X11DPFF-SNR, X11QPL and X11SPA-T motherboards

Specificații

BrandOWC
Part Number2L9D44R4256P
Capacity256GB (2 x 128GB)
Type288-Pin DDR4 ECC LRDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X11DPD-L
Supermicro Motherboard X11DPD-M25
Supermicro Motherboard X11DPFF-SNR
Supermicro Motherboard X11QPL
Supermicro Motherboard X11SPA-T

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

What does the 2933 MT/s rating mean once the modules are installed?

The kit runs at DDR4 2933 (PC4-23400) with CL21 latency, delivering that data rate on any supported Supermicro X11 platform.

What does the PC4-23400 designation cap in practice?

PC4-23400 is the JEDEC standard name for DDR4 2933; the modules will also operate at 2666, 2400 or 2133 MT/s if the system requires a lower speed.

What physical slot and clearance do the 288-pin LRDIMMs need?

Each 128 GB module uses a standard 288-pin DDR4 DIMM slot with no heat spreader, so it fits any compatible Supermicro X11 motherboard DIMM socket.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.