Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green circuit board with gold contacts and black memory chips

OWC

OWC 2GB DDR3 1333 PC3-10600 CL9 204-pin SODIMM HP TouchSmart 9100 memory upgrade

SKU CH-K498-GQ6DJ

2GB DDR3 1333 PC3-10600 CL9 204-pin SODIMM upgrade for HP TouchSmart 9100

  • Capacity2GB
  • Type204-Pin DDR3 Non-ECC SODIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.5V
  • ECCNo
  • 2GB DDR3 module adds responsive multitasking capacity
  • 1333 MHz CL9 timing matches HP TouchSmart 9100 spec
  • 5 V JEDEC-standard voltage ensures warranty-safe operation
  • 204-pin SODIMM form factor fits the all-in-one slot
  • Single-rank 1Rx8 design installs without pairing constraints

HP TouchSmart 9100 memory upgrade

This OWC module is a 2 GB DDR3 SODIMM built to JEDEC PC3-10600 standards. It runs at 1333 MHz with CL9 latency and 1.5 V unbuffered operation. The single 1Rx8 rank fits the 204-pin slot used by the HP TouchSmart 9100 all-in-one system.

Suits owners restoring

Builders who need a higher single-module capacity, faster DDR3 speeds or ECC error correction should look at something else. The fixed 2 GB density and non-ECC design limit use to basic desktop workloads on this specific platform.

204-pin DDR3 1333 PC3-10600 CL9 specification

Matching this exact speed, voltage and pin count is the single requirement for compatibility. A module with a different data rate, CAS latency or form factor will not function in the TouchSmart 9100 memory slot.

Puncte forte

  • 2GB DDR3 module adds responsive multitasking capacity
  • 1333 MHz CL9 timing matches HP TouchSmart 9100 spec
  • 5 V JEDEC-standard voltage ensures warranty-safe operation
  • 204-pin SODIMM form factor fits the all-in-one slot
  • Single-rank 1Rx8 design installs without pairing constraints

Specificații

BrandOWC
Part Number1S3D31R802GB
Capacity2GB
Type204-Pin DDR3 Non-ECC SODIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
Heat SpreaderNo
Compatible SystemHP TouchSmart 9100

Alte versiuni ale acestui model

5 în plus din aceeași gamă

Aceeași familie, memorie, radiator sau frecvență diferite — comparați înainte de a vă decide.

Întrebări despre acest articol

Will the 204-pin DDR3 SODIMM slot in the HP TouchSmart 9100 need any maintenance or replacement over time?

The DDR3 SODIMM itself has no moving parts and requires no maintenance; the slot on the HP TouchSmart 9100 motherboard is designed to last the life of the system.

What is the first limit reached when the module runs at 1333 MHz CL9 continuously?

The CAS latency of CL9 at 1333 MHz sets the timing ceiling; the JEDEC-standard 1.5 V supply and unbuffered design keep signal integrity within spec under sustained load.

How much heat or power does the 1Rx8 2 GB module produce when the all-in-one runs all day?

At 1.5 V the module draws only a few watts and has no heat spreader, so it adds minimal heat to the TouchSmart 9100 chassis during extended use.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.